7 Best 10G SFP+ Transceivers and DAC Cables in 2026
The FS SFP-10G-SR is the safest first pick for most buyers: a widely compatible 10G SR optic at a low published price. Choose the Ubiquiti UACC-DAC-SFP10-0.5M if you run UniFi gear and want a short passive copper link. Choose the MikroTik S+85DLC03D if you need a MikroTik-matched multimode optic with a known vendor datasheet.
By Shihab Mia · Published 22 Nov 2026
We run no ads and no affiliate links at launch. The order of a list follows our published method. How lists are ordered: how we score.
Prices are the starting prices vendors list publicly. Plans change, so confirm the current price on the vendor page before you buy.
Key takeaways
- 10G SR optics reach about 300 m over OM3 multimode fiber; LR optics reach about 10 km over single-mode fiber.
- Passive DAC cables are the cheapest short-run option and add no optics power draw.
- Vendor coding matters: Cisco, Ubiquiti and MikroTik switches may reject uncoded third-party modules.
- Published prices for third-party optics sit well below original-brand equivalents.
- Always confirm the switch datasheet lists the module or cable before buying.
Side-by-side
Grouped by fit and cost. Tap a product to jump to its full entry.
| Fit | Cost | |||
|---|---|---|---|---|
| Product | Best for | Standout feature | Listed starting price | Free plan or trial |
| 1FS SFP-10G-SR | general 10G multimode links | widely compatible coding options | See vendor site (per module) | One-time hardware purchase |
| 2Ubiquiti UACC-DAC-SFP10-0.5M | short UniFi switch-to-switch runs | passive design with no optics power draw | Check current retail price (0.5 m passive DAC) | One-time hardware purchase |
| 3MikroTik S+85DLC03D | MikroTik-matched multimode optics | matched to MikroTik switch documentation | Check current retail price (per module) | One-time hardware purchase |
| 4Cisco SFP-10G-SR-S | Cisco-coded multimode optics | original Cisco coding | Check current retail price (per module) | One-time hardware purchase |
| 5FS SFP-10G-LR | long single-mode runs | long single-mode reach | See vendor site (per module) | One-time hardware purchase |
| 6Ubiquiti UACC-OM-SFP10-10G-SR | UniFi multimode optics | built for UniFi compatibility | Check current retail price (per module) | One-time hardware purchase |
| 7MikroTik S+AO0005 | passive 10G DAC for MikroTik gear | passive copper design | Check current retail price (per cable) | One-time hardware purchase |
How we picked
This guide is based on research, not lab testing. We read vendor product pages, datasheets and compatibility documentation for each module and cable, and checked published prices where the vendor lists them. We compared fiber type, wavelength, connector, coding options and stated reach. We prioritized products that are currently sold and documented by their manufacturer. Where a figure was not clear from the vendor page, we described it qualitatively instead of guessing.
The 7 picks in detail

- Best for
- general 10G multimode links
- Standout
- widely compatible coding options
- Starting price
- See vendor site (per module)
- Free plan or trial
- One-time hardware purchase
This is a 10G SFP+ SR transceiver using an 850 nm wavelength over multimode fiber. FS lists a reach of about 300 m on OM3 and 400 m on OM4. It uses a duplex LC connector and supports digital diagnostics through the standard management interface. FS sells it with coding options for many switch brands, which helps with compatibility. The main catch is that some vendors restrict third-party modules, so check your switch firmware notes first.
Where the price comes from
See vendor site (per module). Hardware prices move often, so check the FS SFP-10G-SR maker page or a retailer before you buy.
Benefits
- widely compatible coding options
- low published price
- 300 m reach over OM3
- hot-swappable
Drawbacks
- third-party coding may not suit every switch
- fiber patch cables sold separately
Use case to skip: this limit matters to you: third-party coding may not suit every switch.
Our take. A sensible pick for general 10G multimode links.
If it does not fit, compare Ubiquiti UACC-DAC-SFP10-0.5M or MikroTik S+85DLC03D in this list.

- Best for
- short UniFi switch-to-switch runs
- Standout
- passive design with no optics power draw
- Starting price
- Check current retail price (0.5 m passive DAC)
- Free plan or trial
- One-time hardware purchase
This is a passive 10G SFP+ direct attach copper cable at 0.5 m. Passive DACs carry 10G over short distances without powered optics, which keeps heat and cost down. It suits linking two UniFi switches in the same rack. The catch is length: passive DAC reach is short, so plan cable routing before buying. For longer runs, use fiber with SR optics instead.
Where the price comes from
Check current retail price (0.5 m passive DAC). Hardware prices move often, so check the Ubiquiti UACC-DAC-SFP10-0.5M maker page or a retailer before you buy.
Benefits
- passive design with no optics power draw
- built for UniFi compatibility
- short 0.5 m length suits rack links
Drawbacks
- limited to very short runs
- UniFi-focused coding
Use case to skip: this limit matters to you: limited to very short runs.
Our take. A sensible pick for short UniFi switch-to-switch runs.
If it does not fit, compare FS SFP-10G-SR or MikroTik S+85DLC03D in this list.

- Best for
- MikroTik-matched multimode optics
- Standout
- matched to MikroTik switch documentation
- Starting price
- Check current retail price (per module)
- Free plan or trial
- One-time hardware purchase
MikroTik lists this as a 10G SFP+ module for multimode fiber at 850 nm with a duplex LC connector. It is the module MikroTik documents for its own SFP+ switches, which reduces compatibility risk. It suits buyers standardizing on MikroTik hardware. The catch is that it is coded for MikroTik, so it may not be the best choice for other brands. Confirm the reach figure on the current datasheet before long runs.
Where the price comes from
Check current retail price (per module). Hardware prices move often, so check the MikroTik S+85DLC03D maker page or a retailer before you buy.
Benefits
- matched to MikroTik switch documentation
- 850 nm multimode design
- duplex LC connector
Drawbacks
- coding aimed at MikroTik gear
- fiber cables not included
Use case to skip: this limit matters to you: coding aimed at MikroTik gear.
Our take. A sensible pick for mikroTik-matched multimode optics.
If it does not fit, compare FS SFP-10G-SR or Ubiquiti UACC-DAC-SFP10-0.5M in this list.

- Best for
- Cisco-coded multimode optics
- Standout
- original Cisco coding
- Starting price
- Check current retail price (per module)
- Free plan or trial
- One-time hardware purchase
This is Cisco's own 10G SFP+ SR module for multimode fiber. Buying the original part removes coding doubt on Cisco switches and keeps support aligned with Cisco documentation. It suits environments where only original optics are allowed. The catch is price: original modules cost more than third-party equivalents. Check the switch datasheet for the exact part number your platform supports.
Where the price comes from
Check current retail price (per module). Hardware prices move often, so check the Cisco SFP-10G-SR-S maker page or a retailer before you buy.
Benefits
- original Cisco coding
- documented Cisco compatibility
- 10G SR multimode design
Drawbacks
- higher price than third-party optics
- needs Cisco-supported switch
Use case to skip: this limit matters to you: higher price than third-party optics.
Our take. A sensible pick for cisco-coded multimode optics.
If it does not fit, compare FS SFP-10G-SR or Ubiquiti UACC-DAC-SFP10-0.5M in this list.

- Best for
- long single-mode runs
- Standout
- long single-mode reach
- Starting price
- See vendor site (per module)
- Free plan or trial
- One-time hardware purchase
This is a 10G SFP+ LR transceiver for single-mode fiber at 1310 nm. FS lists a reach of about 10 km, which suits building-to-building links. It uses a duplex LC connector and supports digital diagnostics. It suits buyers who need distance beyond multimode limits. The catch is fiber type: LR modules need single-mode cabling, so confirm your plant before ordering.
Where the price comes from
See vendor site (per module). Hardware prices move often, so check the FS SFP-10G-LR maker page or a retailer before you buy.
Benefits
- long single-mode reach
- duplex LC connector
- multiple coding options
Drawbacks
- needs single-mode fiber
- coding must match the switch
Use case to skip: this limit matters to you: needs single-mode fiber.
Our take. A sensible pick for long single-mode runs.
If it does not fit, compare FS SFP-10G-SR or Ubiquiti UACC-DAC-SFP10-0.5M in this list.

- Best for
- UniFi multimode optics
- Standout
- built for UniFi compatibility
- Starting price
- Check current retail price (per module)
- Free plan or trial
- One-time hardware purchase
This is Ubiquiti's 10G SFP+ SR module for multimode fiber. It is the optic Ubiquiti documents for its own switches, which keeps coding and support consistent inside a UniFi deployment. It suits mixed UniFi racks that need fiber instead of DAC. The catch is that it is aimed at Ubiquiti gear, and patch cables are separate. Verify the reach figure on the current Ubiquiti datasheet.
Where the price comes from
Check current retail price (per module). Hardware prices move often, so check the Ubiquiti UACC-OM-SFP10-10G-SR maker page or a retailer before you buy.
Benefits
- built for UniFi compatibility
- 10G SR multimode design
- pairs with Ubiquiti fiber accessories
Drawbacks
- UniFi-focused coding
- fiber patch cables extra
Use case to skip: this limit matters to you: uniFi-focused coding.
Our take. A sensible pick for uniFi multimode optics.
If it does not fit, compare FS SFP-10G-SR or Ubiquiti UACC-DAC-SFP10-0.5M in this list.

- Best for
- passive 10G DAC for MikroTik gear
- Standout
- passive copper design
- Starting price
- Check current retail price (per cable)
- Free plan or trial
- One-time hardware purchase
This is a passive 10G SFP+ direct attach copper cable from MikroTik. Passive DACs are the simplest way to link two SFP+ ports in the same rack, with no optics to configure. It suits MikroTik-to-MikroTik links. The catch is distance: passive copper is for short runs only. Check the current MikroTik datasheet for the exact length and compatibility notes.
Where the price comes from
Check current retail price (per cable). Hardware prices move often, so check the MikroTik S+AO0005 maker page or a retailer before you buy.
Benefits
- passive copper design
- no optics power draw
- matched to MikroTik SFP+ ports
Drawbacks
- short reach only
- MikroTik-focused
Use case to skip: this limit matters to you: short reach only.
Our take. A sensible pick for passive 10G DAC for MikroTik gear.
If it does not fit, compare FS SFP-10G-SR or Ubiquiti UACC-DAC-SFP10-0.5M in this list.
What specs matter when you buy
Start with fiber type. SR optics use multimode fiber and cover short to medium runs inside a building. LR optics use single-mode fiber and cover long runs between buildings. Buying the wrong optic for your cabling is the most common mistake, so check what fiber is already installed before choosing a module.
Next, check coding and compatibility. Switches from Cisco, Ubiquiti and MikroTik may only accept modules coded for their brand, or may log warnings for third-party parts. Read the switch datasheet and firmware notes. Third-party vendors often sell the same module with different coding options, so pick the one that matches your switch.
Then decide between fiber and DAC. Passive DAC cables are cheap and draw no optics power, but only work over short distances in a rack. Fiber with SR or LR optics costs more but covers distance. Also confirm connector type (usually duplex LC), wavelength, and whether the module supports digital diagnostics. Finally, check warranty terms and the vendor's compatibility list before paying.
Questions worth answering first
Buying checklist
- Confirm whether your switch ports are SFP+ and support 10G.
- Check which fiber type is installed: multimode for SR, single-mode for LR.
- Read the switch datasheet for supported module part numbers.
- Decide between a passive DAC for short rack links and fiber optics for distance.
- Confirm connector type, usually duplex LC, matches your patch cables.
- Check the vendor warranty and return policy before ordering.
FAQ
What is the difference between SR and LR SFP+ modules?
SR modules use multimode fiber at 850 nm and cover short to medium runs inside a building. LR modules use single-mode fiber at 1310 nm and cover much longer distances. Pick based on the fiber you already have installed.
Are third-party SFP+ modules safe to use?
They often work fine, but some switch vendors restrict uncoded modules or log warnings. Check your switch firmware notes and the module vendor's compatibility list before buying. Original modules remove that risk at a higher price.
When should I use a DAC cable instead of fiber?
Use a passive DAC for short links between switches in the same rack. It is cheaper and draws no optics power. Use fiber with SR or LR optics when you need distance or cable flexibility.
Do SFP+ modules need configuration?
Most SFP+ optics and DAC cables are hot-swappable and need no configuration. The switch detects the module automatically. You may still need to configure the port speed or link settings on the switch.
Can I mix brands of SFP+ modules and switches?
Sometimes, but compatibility varies. Coding and firmware rules differ by vendor. Check the switch documentation and the module vendor's compatibility list. Mixing brands is common in third-party optics but needs verification.
What reach can I expect from multimode fiber?
Reach depends on fiber grade and the module. Vendor datasheets list figures for OM3 and OM4 cable. Check the current datasheet for your exact module rather than assuming a fixed distance.
Sources we checked
Change log: First published 22 Nov 2026.