Skip to main content
Top TechHardware
Collections
Send a correction

PC parts and peripherals

7 Best XLR Microphones for Streaming in 2026

The Shure MV7+ is the top pick for most streamers because it offers both USB and XLR output, onboard DSP, and a published price around $279. If you want a pure analog condenser with a warm tone, the Audio-Technica AT2020 is a proven low-cost choice. For a dynamic mic with strong off-axis rejection in a noisy room, the Rode PodMic is a solid alternative.

By · Published 22 Nov 2026

7 products compared

We run no ads and no affiliate links at launch. The order of a list follows our published method. How lists are ordered: how we score.

Prices are the starting prices vendors list publicly. Plans change, so confirm the current price on the vendor page before you buy.

Key takeaways

  • The Shure MV7+ works over USB-C and XLR, so you can start simple and move to an interface later.
  • Dynamic mics like the Rode PodMic and Shure SM7dB reject more room noise than condensers.
  • The Audio-Technica AT2020 is one of the lowest-cost true XLR condensers from a major brand.
  • All seven mics here need an audio interface or mixer; none include one in the box.
  • Check that your interface supplies enough gain for low-output dynamic mics before buying.

Side-by-side

Grouped by fit and cost. Tap a product to jump to its full entry.

FitCost
ProductBest forStandout featureListed starting priceFree plan or trial
1Shure MV7+Hybrid USB/XLR streamingUSB-C and XLR outputsCheck current retail priceOne-time hardware purchase
2Shure SM7dBNoisy rooms and pro podcastsBuilt-in preamp with switchable gainCheck current retail priceOne-time hardware purchase
3Rode PodMicBudget dynamic broadcast soundLow price for a dynamic micCheck current retail priceOne-time hardware purchase
4Audio-Technica AT2020Low-cost condenser for clear vocalsLow price for a condenserCheck current retail priceOne-time hardware purchase
5Rode NT1 5th GenerationDual-output studio condenserXLR and USB-C outputsCheck current retail priceOne-time hardware purchase
6Electro-Voice RE20Deep-voice broadcast toneVariable-D design reduces proximity effectCheck current retail priceOne-time hardware purchase
7sE Electronics DynaCaster DCM8Dynamic mic with built-in preampBuilt-in preampCheck current retail priceOne-time hardware purchase

How we picked

This guide is based on research, not hands-on testing. We reviewed each manufacturer's product page and published spec sheet for polar pattern, output type, and included accessories. We checked published list prices where the vendor states them and marked others as check current retail price. We limited the list to XLR microphones from established brands that are currently sold and fit streaming or podcasting. No lab measurements or listening tests were performed.

The 7 picks in detail

#1

Shure MV7+

Official site
Screenshot of the Shure MV7+ website
Vendor homepage, Nov 2026. Source: shure.com
Best for
Hybrid USB/XLR streaming
Standout
USB-C and XLR outputs
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

The MV7+ is a dynamic microphone with both USB-C and XLR outputs. Shure lists a cardioid polar pattern and a voice-isolating design aimed at podcasters and streamers. The onboard DSP includes auto level, tone shaping, and a mute control, and there is a headphone jack for direct monitoring. It suits people who want to start on USB and later move to an interface without buying a second mic. The main catch is price: you pay for the hybrid features, and the DSP options depend on Shure's software.

Where the price comes from

Check current retail price. Hardware prices move often, so check the Shure MV7+ maker page or a retailer before you buy.

Benefits

  • USB-C and XLR outputs
  • onboard DSP and auto level modes
  • built-in headphone monitoring

Drawbacks

  • Costs more than a basic XLR-only mic
  • DSP features need the Shure app

Use case to skip: this limit matters to you: costs more than a basic XLR-only mic.

Our take. A sensible pick for hybrid USB/XLR streaming.

If it does not fit, compare Shure SM7dB or Rode PodMic in this list.

#2

Shure SM7dB

Official site
Screenshot of the Shure SM7dB website
Vendor homepage, Nov 2026. Source: shure.com
Best for
Noisy rooms and pro podcasts
Standout
Built-in preamp with switchable gain
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

The SM7dB is a dynamic broadcast microphone based on the SM7B, with a built-in preamp that adds switchable gain. Shure lists a cardioid pattern and a design that rejects background noise, which helps in untreated rooms. The built-in preamp means many interfaces no longer need a separate inline booster. It suits serious podcasters and streamers with a fixed setup. The catch is cost, and the preamp requires phantom power from your interface to work.

Where the price comes from

Check current retail price. Hardware prices move often, so check the Shure SM7dB maker page or a retailer before you buy.

Benefits

  • Built-in preamp with switchable gain
  • strong off-axis rejection
  • cardioid dynamic design

Drawbacks

  • High price
  • needs phantom power for the preamp

Use case to skip: this limit matters to you: high price.

Our take. A sensible pick for noisy rooms and pro podcasts.

If it does not fit, compare Shure MV7+ or Rode PodMic in this list.

#3

Rode PodMic

Official site
Screenshot of the Rode PodMic website
Vendor homepage, Nov 2026. Source: rode.com
Best for
Budget dynamic broadcast sound
Standout
Low price for a dynamic mic
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

The PodMic is a dynamic microphone with a cardioid pattern, built for speech. Rode lists an internal pop filter and a built-in swing mount, so it works with many boom arms without extra hardware. It suits streamers on a budget who want a broadcast-style dynamic sound. The catch is output level: dynamic mics are quieter than condensers, so pair it with an interface that has enough clean gain.

Where the price comes from

Check current retail price. Hardware prices move often, so check the Rode PodMic maker page or a retailer before you buy.

Benefits

  • Low price for a dynamic mic
  • internal pop filter
  • integrated swing mount

Drawbacks

  • Low output needs a clean preamp
  • heavier body

Use case to skip: this limit matters to you: low output needs a clean preamp.

Our take. A sensible pick for budget dynamic broadcast sound.

If it does not fit, compare Shure MV7+ or Shure SM7dB in this list.

#4

Audio-Technica AT2020

Official site
AT
Audio-Technica AT2020: no homepage screenshot on file. Check audio-technica.com.
Best for
Low-cost condenser for clear vocals
Standout
Low price for a condenser
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

The AT2020 is a side-address condenser with a cardioid polar pattern. Audio-Technica lists it for project studios and home recording, and it needs phantom power from an interface or mixer. It suits streamers in a quiet, treated room who want a bright, detailed vocal sound. The catch is that condensers are more sensitive to room reflections and background noise than dynamic mics, so an untreated room will show up in the recording.

Where the price comes from

Check current retail price. Hardware prices move often, so check the Audio-Technica AT2020 maker page or a retailer before you buy.

Benefits

  • Low price for a condenser
  • cardioid pattern
  • widely supported

Drawbacks

  • Picks up more room noise
  • needs phantom power

Use case to skip: this limit matters to you: picks up more room noise.

Our take. A sensible pick for low-cost condenser for clear vocals.

If it does not fit, compare Shure MV7+ or Shure SM7dB in this list.

#5

Rode NT1 5th Generation

Official site
Screenshot of the Rode NT1 5th Generation website
Vendor homepage, Nov 2026. Source: rode.com
Best for
Dual-output studio condenser
Standout
XLR and USB-C outputs
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

The NT1 5th Generation is a large-diaphragm condenser with both XLR and USB-C outputs. Rode lists a cardioid pattern and a low-noise design aimed at studio vocals. The dual output lets you record over USB or connect to an interface over XLR. It suits streamers who want a detailed condenser sound and the option to skip an interface at first. The catch is that its sensitivity makes room treatment more important.

Where the price comes from

Check current retail price. Hardware prices move often, so check the Rode NT1 5th Generation maker page or a retailer before you buy.

Benefits

  • XLR and USB-C outputs
  • low self-noise design
  • cardioid condenser

Drawbacks

  • Condenser sensitivity picks up room
  • higher price than basic condensers

Use case to skip: this limit matters to you: condenser sensitivity picks up room.

Our take. A sensible pick for dual-output studio condenser.

If it does not fit, compare Shure MV7+ or Shure SM7dB in this list.

#6

Electro-Voice RE20

Official site
Screenshot of the Electro-Voice RE20 website
Vendor homepage, Nov 2026. Source: electrovoice.com
Best for
Deep-voice broadcast tone
Standout
Variable-D design reduces proximity effect
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

The RE20 is a dynamic broadcast microphone with a cardioid pattern. Electro-Voice lists a Variable-D design that reduces proximity effect, so the tone stays consistent when you move closer or farther away. It is a long-standing choice in radio and podcast studios. It suits deep voices and hosts who move around at the mic. The catch is price and weight: it needs a solid boom arm and a preamp with enough gain.

Where the price comes from

Check current retail price. Hardware prices move often, so check the Electro-Voice RE20 maker page or a retailer before you buy.

Benefits

  • Variable-D design reduces proximity effect
  • cardioid dynamic
  • long-standing broadcast standard

Drawbacks

  • Premium price
  • heavy and needs a sturdy mount

Use case to skip: this limit matters to you: premium price.

Our take. A sensible pick for deep-voice broadcast tone.

If it does not fit, compare Shure MV7+ or Shure SM7dB in this list.

#7

sE Electronics DynaCaster DCM8

Official site
Screenshot of the sE Electronics DynaCaster DCM8 website
Vendor homepage, Nov 2026. Source: seelectronics.com
Best for
Dynamic mic with built-in preamp
Standout
Built-in preamp
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

The DynaCaster DCM8 is a dynamic microphone with a built-in preamp and onboard controls. sE Electronics lists a cardioid pattern and a design aimed at broadcast and streaming. The built-in preamp reduces the gain you need from an interface, which helps with low-output dynamic mics. It suits streamers who want a dynamic sound without adding an inline booster. The catch is that the extra controls add setup steps, and the price is above basic dynamic models.

Where the price comes from

Check current retail price. Hardware prices move often, so check the sE Electronics DynaCaster DCM8 maker page or a retailer before you buy.

Benefits

  • Built-in preamp
  • cardioid dynamic design
  • onboard tone controls

Drawbacks

  • Higher price than plain dynamic mics
  • controls add setup steps

Use case to skip: this limit matters to you: higher price than plain dynamic mics.

Our take. A sensible pick for dynamic mic with built-in preamp.

If it does not fit, compare Shure MV7+ or Shure SM7dB in this list.

What specs matter when you buy

Start with the polar pattern. Cardioid is the common choice for one person at a desk because it favors sound from the front and rejects more from the sides and rear. Dynamic mics generally reject room noise better than condensers, which makes them a safer pick for untreated rooms. Condensers are more sensitive and detailed but pick up reflections, fans, and keyboard noise.

Next, check output level and gain. Dynamic mics usually put out a lower signal, so your interface needs enough clean gain. Some models here include a built-in preamp to solve that. Condensers need phantom power, which most interfaces supply. Confirm your interface provides it before buying a condenser.

Finally, look at connectivity and mounting. All seven mics use XLR, but two also offer USB-C, which helps if you want to skip an interface at first. Check the mount type and weight, since heavy broadcast mics need a sturdy boom arm. Also confirm the mic includes a shock mount or pop filter, or budget for one.

Questions worth answering first

Buying checklist

  • Confirm the mic uses XLR and that your interface or mixer has an XLR input.
  • Check whether the mic is dynamic or condenser and whether it needs phantom power.
  • Verify your interface has enough clean gain for a low-output dynamic mic.
  • Confirm the box includes a mount or shock mount, or budget for one.
  • Measure your desk and boom arm to handle the mic's weight.
  • Check the manufacturer's published price and current retail price before paying.

FAQ

Do I need an audio interface for an XLR microphone?

Yes, in most cases. An XLR mic sends an analog signal that needs a preamp, which an audio interface or mixer provides. Two mics here also offer USB-C, so you can record without an interface, but the XLR output still needs one.

Is a dynamic or condenser mic better for streaming?

Dynamic mics suit untreated rooms and noisy spaces because they pick up less background. Condensers give more detail but capture room reflections. For most home streamers, a dynamic mic is the safer starting point.

What is phantom power and do I need it?

Phantom power is a DC voltage an interface sends over XLR to power condenser mics and some preamps. Condensers here need it. Check that your interface can supply it before buying a condenser.

Why do dynamic mics need more gain?

Dynamic mics usually produce a lower output signal than condensers. That means your interface preamp has to add more gain, and a noisy preamp will raise the noise floor. Some mics here include a built-in preamp to help.

Can I use these mics for both streaming and podcasting?

Yes. All seven are speech-focused mics used for both. The main difference is your room and setup: dynamic mics favor noisy rooms, while condensers favor treated spaces.

Do these microphones include a stand or cable?

Most do not include a stand, and XLR cables are often sold separately. Check the box contents on the vendor page. Budget for a boom arm, shock mount, and XLR cable if they are not included.

Sources we checked

  1. Shure SM7dB (official site)
  2. Rode NT1 5th Generation (official site)
  3. Audio-Technica AT2020 (official site)
  4. Electro-Voice RE20 (official site)
  5. sE Electronics DynaCaster DCM8 (official site)

Change log: First published 22 Nov 2026.

Keep reading