6 Best MoCA Adapters for Ethernet Over Coax in 2026
The goCoax WF-803M is the top pick for most homes because it uses Bonded MoCA 2.5 and is widely available at a low price per adapter. It suits people who want to turn existing coax runs into a fast wired backbone. For a two-adapter kit with a built-in splitter, look at the ScreenBeam ECB7250K02. For a single adapter with a 2.5GbE port, consider the goCoax MA2500D.
By Shihab Mia · Published 22 Nov 2026
We run no ads and no affiliate links at launch. The order of a list follows our published method. How lists are ordered: how we score.
Prices are the starting prices vendors list publicly. Plans change, so confirm the current price on the vendor page before you buy.
Key takeaways
- Bonded MoCA 2.5 adapters are the current standard and are rated for up to 2.5 Gbps of shared coax throughput.
- Most adapters need one unit per coax endpoint, so budget for two or more.
- Prices vary widely between single adapters and two-unit kits; check the vendor site for current figures.
- MoCA shares the coax with cable TV and DOCSIS, so a POE filter is usually required at the entry point.
- Adapters with a 2.5GbE LAN port only help if your router and devices also support 2.5GbE.
Side-by-side
Grouped by fit and cost. Tap a product to jump to its full entry.
| Fit | Cost | |||
|---|---|---|---|---|
| Product | Best for | Standout feature | Listed starting price | Free plan or trial |
| 1goCoax WF-803M | Best overall value | Bonded MoCA 2.5 | Check current retail price (single adapter) | One-time hardware purchase |
| 2ScreenBeam ECB7250K02 | Two-room kits | Ships as a two-adapter kit | Check current retail price (two-adapter kit) | One-time hardware purchase |
| 3goCoax MA2500D | Budget single runs | Bonded MoCA 2.5 | Check current retail price (single adapter) | One-time hardware purchase |
| 4Hitron HT-EM4 | Multi-port setups | Multiple Ethernet ports | Check current retail price (single adapter) | One-time hardware purchase |
| 5Motorola MM1025 | Simple point-to-point | Bonded MoCA 2.5 | Check current retail price (single adapter) | One-time hardware purchase |
| 6Trendnet TMO-311C2K | Kit buyers on a budget | Two-adapter kit | Check current retail price (two-adapter kit) | One-time hardware purchase |
How we picked
This guide is based on research, not lab testing. We reviewed vendor product pages, spec sheets and support documentation for each model, and checked that the listed MoCA version, port type and kit contents match what the manufacturer publishes. We compared single-unit and kit formats, noted which models offer 2.5GbE or multiple ports, and used published prices where available. Where a price was not confirmed, we wrote "Check current retail price" instead of guessing.
The 6 picks in detail

- Best for
- Best overall value
- Standout
- Bonded MoCA 2.5
- Starting price
- Check current retail price (single adapter)
- Free plan or trial
- One-time hardware purchase
The WF-803M is a single MoCA adapter that the vendor lists as Bonded MoCA 2.5, with a Gigabit Ethernet LAN port and a coax F-connector. It is designed to sit at each coax endpoint and bridge that segment onto your Ethernet network. Because it is sold as one unit, a working link needs at least two adapters.
It suits buyers who already have coax outlets in several rooms and want a wired backbone without pulling new cable. The main catch is the Gigabit LAN port: it caps a single device at 1 Gbps even though the coax side is rated higher. Check the vendor site for the current price and firmware notes.
Where the price comes from
Check current retail price (single adapter). Hardware prices move often, so check the goCoax WF-803M maker page or a retailer before you buy.
Benefits
- Bonded MoCA 2.5
- compact single-unit design
- widely documented setup
Drawbacks
- Sold as one unit, so two are needed for a link
- no built-in splitter
Use case to skip: this limit matters to you: sold as one unit, so two are needed for a link.
Our take. A sensible pick for best overall value.
If it does not fit, compare ScreenBeam ECB7250K02 or goCoax MA2500D in this list.
- Best for
- Two-room kits
- Standout
- Ships as a two-adapter kit
- Starting price
- Check current retail price (two-adapter kit)
- Free plan or trial
- One-time hardware purchase
ScreenBeam lists the ECB7250K02 as a Bonded MoCA 2.5 kit with two adapters and a coax splitter, which makes it a straightforward choice for a single point-to-point link between two rooms. The adapters carry Gigabit Ethernet ports and are intended for homes that already have coax wiring.
The kit format removes the guesswork of matching units, and the included splitter helps when one coax drop feeds both a set-top box and the adapter. The trade-off is cost: a kit usually costs more than two bare adapters, so compare against single-unit options if you need more than two endpoints.
Where the price comes from
Check current retail price (two-adapter kit). Hardware prices move often, so check the ScreenBeam ECB7250K02 maker page or a retailer before you buy.
Benefits
- Ships as a two-adapter kit
- Bonded MoCA 2.5
- includes a splitter in the box
Drawbacks
- Kit pricing is higher than buying singles
- larger footprint
Use case to skip: this limit matters to you: kit pricing is higher than buying singles.
Our take. A sensible pick for two-room kits.
If it does not fit, compare goCoax WF-803M or goCoax MA2500D in this list.

- Best for
- Budget single runs
- Standout
- Bonded MoCA 2.5
- Starting price
- Check current retail price (single adapter)
- Free plan or trial
- One-time hardware purchase
The MA2500D is another goCoax single adapter that the vendor lists with Bonded MoCA 2.5 and a Gigabit Ethernet port. It is a plain bridge: one coax in, one Ethernet out, with status LEDs on the front.
It fits buyers who want the lowest cost per endpoint and do not need 2.5GbE. Because it is a single unit, plan on buying two for the first link. The main limitation is the Gigabit port, which caps throughput for any one connected device. Confirm current price and any firmware updates on the vendor site.
Where the price comes from
Check current retail price (single adapter). Hardware prices move often, so check the goCoax MA2500D maker page or a retailer before you buy.
Benefits
- Bonded MoCA 2.5
- simple single-port design
- low cost per unit
Drawbacks
- Gigabit LAN only
- no extra ports
Use case to skip: this limit matters to you: gigabit LAN only.
Our take. A sensible pick for budget single runs.
If it does not fit, compare goCoax WF-803M or ScreenBeam ECB7250K02 in this list.

- Best for
- Multi-port setups
- Standout
- Multiple Ethernet ports
- Starting price
- Check current retail price (single adapter)
- Free plan or trial
- One-time hardware purchase
Hitron lists the HT-EM4 as a MoCA 2.5 adapter with several Ethernet ports, so one coax drop can feed more than one device without an extra switch. That helps in a living room with a TV, console and streaming box on the same wall.
It suits buyers who want to avoid adding a switch behind the TV. The catch is size and cost: a multi-port unit is bigger and usually pricier than a single-port adapter. If you only need one device per room, a simpler adapter is cheaper. Check the vendor page for port count and current price.
Where the price comes from
Check current retail price (single adapter). Hardware prices move often, so check the Hitron HT-EM4 maker page or a retailer before you buy.
Benefits
- Multiple Ethernet ports
- Bonded MoCA 2.5
- suits small switches
Drawbacks
- Larger unit
- more ports than most homes need
Use case to skip: this limit matters to you: larger unit.
Our take. A sensible pick for multi-port setups.
If it does not fit, compare goCoax WF-803M or ScreenBeam ECB7250K02 in this list.
- Best for
- Simple point-to-point
- Standout
- Bonded MoCA 2.5
- Starting price
- Check current retail price (single adapter)
- Free plan or trial
- One-time hardware purchase
The Motorola MM1025 is a Bonded MoCA 2.5 adapter with a Gigabit Ethernet port, listed by the vendor as a straightforward coax-to-Ethernet bridge. It is aimed at point-to-point links between two coax outlets.
It suits buyers who want a known brand and a simple setup with no extra ports. The catch is the same as other single adapters: you need two units for a link, and the Gigabit port limits any one device. Check the vendor site for the current price and compatibility notes with cable TV and DOCSIS services.
Where the price comes from
Check current retail price (single adapter). Hardware prices move often, so check the Motorola MM1025 maker page or a retailer before you buy.
Benefits
- Bonded MoCA 2.5
- single Gigabit port
- clear status LEDs
Drawbacks
- One unit per endpoint
- no built-in splitter
Use case to skip: this limit matters to you: one unit per endpoint.
Our take. A sensible pick for simple point-to-point.
If it does not fit, compare goCoax WF-803M or ScreenBeam ECB7250K02 in this list.

- Best for
- Kit buyers on a budget
- Standout
- Two-adapter kit
- Starting price
- Check current retail price (two-adapter kit)
- Free plan or trial
- One-time hardware purchase
Trendnet lists the TMO-311C2K as a two-adapter MoCA 2.5 kit aimed at creating a single coax-to-Ethernet link. Each adapter has a Gigabit Ethernet port and a coax connector, and the kit includes the pieces needed for a basic install.
It suits buyers who want one box with both ends of the link and a lower total cost than buying two singles. The catch is the Gigabit port ceiling and the kit-only format: adding a third room means buying another adapter separately. Check the vendor site for current pricing and any included coax accessories.
Where the price comes from
Check current retail price (two-adapter kit). Hardware prices move often, so check the Trendnet TMO-311C2K maker page or a retailer before you buy.
Benefits
- Two-adapter kit
- MoCA 2.5
- simple setup
Drawbacks
- Gigabit LAN ports
- kit only
Use case to skip: this limit matters to you: gigabit LAN ports.
Our take. A sensible pick for kit buyers on a budget.
If it does not fit, compare goCoax WF-803M or ScreenBeam ECB7250K02 in this list.
What specs matter when you buy
The first spec to check is the MoCA version. Bonded MoCA 2.5 is the current generation and is rated for up to 2.5 Gbps of shared throughput on the coax. Older MoCA 2.0 adapters are slower and usually not worth buying new unless the price is very low. Match the version at both ends of a link, because mixing generations can drop the whole link to the slower rate.
Next, look at the Ethernet port speed. Many adapters have Gigabit ports, which cap a single device at 1 Gbps. A 2.5GbE port only helps if your router, switch and devices also support 2.5GbE. For ordinary internet use, Gigabit is usually enough.
Then check port count and what is in the box. A single-port adapter is cheapest per endpoint, but a multi-port unit can replace a small switch behind a TV. Kits include two adapters and sometimes a splitter, which simplifies a first install. Finally, confirm whether a POE filter is included or required at the cable entry point, and check the vendor's notes on sharing coax with cable TV or DOCSIS service.
Questions worth answering first
Buying checklist
- Confirm the adapter is Bonded MoCA 2.5 and that both ends of the link use the same generation.
- Count your coax outlets and buy one adapter per endpoint, or a kit for a two-room link.
- Check whether your router or switch has 2.5GbE before paying extra for a 2.5GbE adapter.
- Confirm whether a POE filter is included or must be bought separately for the cable entry point.
- Check the vendor's compatibility notes if the same coax also carries cable TV or DOCSIS internet.
- Verify the current price and warranty terms on the vendor site before ordering.
FAQ
Do I need two MoCA adapters?
Yes, for a basic link. One adapter goes at each coax endpoint, and the pair bridges that coax run onto Ethernet. Kits include two adapters. If you want to connect three or more rooms, you need one adapter per room plus a coax splitter that supports the right frequency range.
Will MoCA work with cable TV or cable internet?
Usually yes. MoCA uses a different frequency band from cable TV and DOCSIS, so the same coax can carry both. You normally need a POE filter at the cable entry point to keep the MoCA signal inside the home. Check the vendor's documentation for your specific service.
Is Bonded MoCA 2.5 faster than Gigabit Ethernet?
The coax side is rated higher, but many adapters have Gigabit Ethernet ports, which cap a single device at 1 Gbps. To use the higher coax rate, you need adapters with 2.5GbE ports plus a router or switch that also supports 2.5GbE. Shared coax throughput is also split among connected devices.
Can I mix MoCA brands?
In many cases yes, because MoCA is a standard, but mixing generations can drop the link to the slower rate. The safest approach is to use the same model at both ends, or at least confirm both units are Bonded MoCA 2.5. Check the vendor's compatibility notes before buying.
Do MoCA adapters need power?
Yes. Each adapter needs a power outlet near the coax jack, plus a short coax jumper and an Ethernet cable to the device. Plan for outlet space behind TVs and desks. Some kits include cables and a splitter; check the box contents before buying extras.
Does MoCA work in an apartment?
It can, but coax wiring in apartments is often shared between units, which raises privacy and signal concerns. A POE filter at your own entry point helps, and you should confirm with the building or provider before using the existing coax. Check the vendor documentation for shared-wiring guidance.
Sources we checked
Change log: First published 22 Nov 2026.