7 Best PoE Switches for Cameras and Access Points in 2026
The Ubiquiti UniFi Switch Lite 8 PoE is the best starting point for most home and small-office camera or access point rollouts: eight ports, four PoE+ ports and a published list price of $109. If you need more PoE headroom for several cameras, the TP-Link TL-SG2210MP gives eight PoE+ ports and a larger budget. For a managed 24-port rack switch, the Ubiquiti UniFi Switch Pro 24 PoE is the step up.
By Shihab Mia · Published 21 Nov 2026
We run no ads and no affiliate links at launch. The order of a list follows our published method. How lists are ordered: how we score.
Prices are the starting prices vendors list publicly. Plans change, so confirm the current price on the vendor page before you buy.
Key takeaways
- PoE budget, not port count, is the limit that matters: a switch can only power as many devices as its total wattage allows.
- The UniFi Switch Lite 8 PoE lists at $109 and delivers PoE+ on four of its eight ports.
- TP-Link's TL-SG2210MP offers eight PoE+ ports with a 150 W budget at a low published price.
- 802.3af (up to 15.4 W) suits most access points; 802.3at PoE+ (up to 30 W) suits PTZ cameras and Wi-Fi 6E APs.
- Managed switches add VLANs and per-port power control; unmanaged models are cheaper but fixed.
Side-by-side
Grouped by fit and cost. Tap a product to jump to its full entry.
| Fit | Cost | |||
|---|---|---|---|---|
| Product | Best for | Standout feature | Listed starting price | Free plan or trial |
| 1Ubiquiti UniFi Switch Lite 8 PoE | Small camera and access point setups | Compact desktop size | $109 (vendor list price) | One-time hardware purchase |
| 2TP-Link TL-SG2210MP | Budget 8-port PoE+ managed switch | Eight PoE+ ports | See vendor site | One-time hardware purchase |
| 3Netgear GS310TP | Small business with mixed wired devices | Eight PoE+ ports plus two SFP uplinks | Check current retail price | One-time hardware purchase |
| 4Ubiquiti UniFi Switch Pro 24 PoE | Rack-mounted 24-port deployments | 24 PoE+ ports with a large published budget | $799 (vendor list price) | One-time hardware purchase |
| 5TP-Link TL-SG3428MP | 24-port managed PoE+ on a budget | 24 PoE+ ports | See vendor site | One-time hardware purchase |
| 6Netgear MS510TXPP | Multi-gig uplinks and PoE+ | Multi-gig copper ports | Check current retail price | One-time hardware purchase |
| 7Zyxel GS1900-24HP | Simple managed 24-port PoE | 24 PoE+ ports | See vendor site | One-time hardware purchase |
How we picked
We compared these switches using vendor product pages, published datasheets and official documentation. We checked port counts, PoE standards, published PoE budgets, uplink types, management features and vendor list prices where available. We focused on models released or refreshed between 2023 and 2025 that vendors still list as current. We did not run hands-on lab tests; figures come from manufacturer specifications, and buyers should confirm the exact variant and price before ordering.
The 7 picks in detail

- Best for
- Small camera and access point setups
- Standout
- Compact desktop size
- Starting price
- $109 (vendor list price)
- Free plan or trial
- One-time hardware purchase
This is an 8-port Gigabit switch with four 802.3at PoE+ ports and four non-PoE ports. Ubiquiti lists a total PoE budget of 52 W, which is enough for a few cameras or access points but not a dense rollout. It is managed through the UniFi Network application, so VLANs and per-port power cycling are available if you run a console or self-hosted controller. It suits a home lab, a small shop or a branch office with a handful of PoE devices. The catch is the low port count and budget: plan device wattages before buying.
Where the price comes from
$109 (vendor list price). Hardware prices move often, so check the Ubiquiti UniFi Switch Lite 8 PoE maker page or a retailer before you buy.
Benefits
- Compact desktop size
- four PoE+ ports with a published 52 W budget
- managed through UniFi Network
Drawbacks
- Only four PoE ports
- best features need a UniFi console or controller
Use case to skip: this limit matters to you: only four PoE ports.
Our take. A sensible pick for small camera and access point setups.
If it does not fit, compare TP-Link TL-SG2210MP or Netgear GS310TP in this list.

- Best for
- Budget 8-port PoE+ managed switch
- Standout
- Eight PoE+ ports
- Starting price
- See vendor site
- Free plan or trial
- One-time hardware purchase
TP-Link's JetStream TL-SG2210MP is a 10-port Gigabit switch: eight PoE+ ports plus two SFP slots. The vendor lists a 150 W PoE budget, which covers several PoE+ cameras or access points at once. It is an L2+ managed switch with VLANs, link aggregation, QoS and per-port PoE scheduling through the web interface. It suits small businesses that want more power headroom than a compact 8-port unit without paying for a 24-port chassis. The main catch is that all copper ports are Gigabit, so it is not a multi-gig choice for high-throughput backbones.
Where the price comes from
See vendor site. Hardware prices move often, so check the TP-Link TL-SG2210MP maker page or a retailer before you buy.
Benefits
- Eight PoE+ ports
- 150 W published PoE budget
- L2+ management with VLANs
Drawbacks
- Gigabit uplinks only
- web interface less polished than UniFi
Use case to skip: this limit matters to you: gigabit uplinks only.
Our take. A sensible pick for budget 8-port PoE+ managed switch.
If it does not fit, compare Ubiquiti UniFi Switch Lite 8 PoE or Netgear GS310TP in this list.

- Best for
- Small business with mixed wired devices
- Standout
- Eight PoE+ ports plus two SFP uplinks
- Starting price
- Check current retail price
- Free plan or trial
- One-time hardware purchase
The Netgear GS310TP is a Smart Managed Pro 10-port Gigabit switch with eight PoE+ ports and two SFP fiber uplinks. Netgear lists it as fanless, which suits quiet offices and closets. Management is through a web interface with VLANs, QoS and PoE scheduling, aimed at buyers who want more than an unmanaged switch but not a full CLI-driven platform. It fits a small office with a few cameras, phones and access points. The catch is a relatively modest PoE budget compared with 24-port models, so add up device wattages first.
Where the price comes from
Check current retail price. Hardware prices move often, so check the Netgear GS310TP maker page or a retailer before you buy.
Benefits
- Eight PoE+ ports plus two SFP uplinks
- fanless design
- simple web management
Drawbacks
- Modest PoE budget
- limited advanced routing features
Use case to skip: this limit matters to you: modest PoE budget.
Our take. A sensible pick for small business with mixed wired devices.
If it does not fit, compare Ubiquiti UniFi Switch Lite 8 PoE or TP-Link TL-SG2210MP in this list.

- Best for
- Rack-mounted 24-port deployments
- Standout
- 24 PoE+ ports with a large published budget
- Starting price
- $799 (vendor list price)
- Free plan or trial
- One-time hardware purchase
This is a 1U rack switch with 24 Gigabit PoE+ ports, two 10G SFP+ uplinks and two additional Gigabit ports. Ubiquiti publishes a total PoE budget in the hundreds of watts, enough for a full rack of cameras and access points, and per-port power cycling is available in the UniFi Network interface. It suits offices, retail sites and multi-camera installations that already use UniFi gear. The catch is ecosystem lock-in for management and the price: it is a serious step up from an 8-port desktop unit.
Where the price comes from
$799 (vendor list price). Hardware prices move often, so check the Ubiquiti UniFi Switch Pro 24 PoE maker page or a retailer before you buy.
Benefits
- 24 PoE+ ports with a large published budget
- two 10G SFP+ uplinks
- full UniFi management
Drawbacks
- Requires a UniFi console or controller
- higher price
Use case to skip: this limit matters to you: requires a UniFi console or controller.
Our take. A sensible pick for rack-mounted 24-port deployments.
If it does not fit, compare Ubiquiti UniFi Switch Lite 8 PoE or TP-Link TL-SG2210MP in this list.

- Best for
- 24-port managed PoE+ on a budget
- Standout
- 24 PoE+ ports
- Starting price
- See vendor site
- Free plan or trial
- One-time hardware purchase
The TL-SG3428MP is a JetStream L2+ managed switch with 24 Gigabit PoE+ ports and four SFP slots. TP-Link lists a large PoE budget suitable for dense camera or access point deployments, plus VLANs, link aggregation, QoS and per-port PoE control. It is the budget route to a 24-port rack switch when you do not need 10G uplinks. It suits schools, small offices and surveillance installs. The catch is that it is Gigabit-only and the management interface is denser than consumer gear, so budget time for configuration.
Where the price comes from
See vendor site. Hardware prices move often, so check the TP-Link TL-SG3428MP maker page or a retailer before you buy.
Benefits
- 24 PoE+ ports
- four SFP slots
- L2+ management with VLANs and PoE scheduling
Drawbacks
- Gigabit only
- web UI takes learning
Use case to skip: this limit matters to you: gigabit only.
Our take. A sensible pick for 24-port managed PoE+ on a budget.
If it does not fit, compare Ubiquiti UniFi Switch Lite 8 PoE or TP-Link TL-SG2210MP in this list.

- Best for
- Multi-gig uplinks and PoE+
- Standout
- Multi-gig copper ports
- Starting price
- Check current retail price
- Free plan or trial
- One-time hardware purchase
The Netgear MS510TXPP is a 10-port Smart Managed Pro switch that mixes multi-gigabit copper ports (including 2.5G and 5G) with PoE+ on eight ports and two SFP+ uplinks. It suits sites that need faster-than-Gigabit links to Wi-Fi 6E or Wi-Fi 7 access points while still powering cameras. Management covers VLANs, QoS and PoE scheduling through the web interface. The catch is cost and complexity: if all your devices are Gigabit, a cheaper 8-port PoE+ switch does the same job.
Where the price comes from
Check current retail price. Hardware prices move often, so check the Netgear MS510TXPP maker page or a retailer before you buy.
Benefits
- Multi-gig copper ports
- PoE+ on eight ports
- two SFP+ uplinks
Drawbacks
- Higher price per port
- overkill for simple camera setups
Use case to skip: this limit matters to you: higher price per port.
Our take. A sensible pick for multi-gig uplinks and PoE+.
If it does not fit, compare Ubiquiti UniFi Switch Lite 8 PoE or TP-Link TL-SG2210MP in this list.

- Best for
- Simple managed 24-port PoE
- Standout
- 24 PoE+ ports
- Starting price
- See vendor site
- Free plan or trial
- One-time hardware purchase
The Zyxel GS1900-24HP is a 24-port Gigabit switch with PoE+ on all copper ports and SFP uplinks, managed through a web interface with VLANs, QoS and PoE scheduling. Zyxel positions the GS1900 series as an easy-to-configure smart managed line for small and mid-sized businesses. It suits camera-heavy sites that want a full 24-port PoE switch without a complex platform. The catch is that it is Gigabit-only and lighter on advanced routing than premium managed switches, so check the datasheet for the exact PoE budget of the variant you buy.
Where the price comes from
See vendor site. Hardware prices move often, so check the Zyxel GS1900-24HP maker page or a retailer before you buy.
Benefits
- 24 PoE+ ports
- fanless option on some variants
- straightforward web management
Drawbacks
- Gigabit only
- fewer advanced features than higher-tier models
Use case to skip: this limit matters to you: gigabit only.
Our take. A sensible pick for simple managed 24-port PoE.
If it does not fit, compare Ubiquiti UniFi Switch Lite 8 PoE or TP-Link TL-SG2210MP in this list.
What specs matter when you buy
Start with the PoE budget, not the port count. A switch's total PoE wattage is shared across all powered ports, so a 24-port model with a small budget cannot run 24 PoE+ cameras at once. Add up the wattage of each device from its datasheet, then leave headroom for startup peaks. Most access points run on 802.3af (up to 15.4 W), while PTZ cameras and Wi-Fi 6E or Wi-Fi 7 access points often need 802.3at PoE+ (up to 30 W). Check that each port supports the standard your devices need.
Next, look at uplinks and management. Gigabit copper is fine for most cameras, but multi-gig or SFP+ uplinks help when several high-throughput access points share a backbone. Managed switches add VLANs to separate camera traffic, per-port PoE scheduling and power cycling, and link aggregation. Unmanaged switches are cheaper but fixed. Consider noise too: fanless models suit offices, while 24-port rack units often have fans.
Finally, check warranty, firmware support and the management ecosystem. A switch tied to a controller platform is easier to run if you already use that platform, but harder to mix with other brands. Confirm the published PoE budget for the exact model and region, since vendors sometimes ship variants with different power supplies.
Questions worth answering first
Buying checklist
- Add up the wattage of every PoE device and compare it with the switch's total PoE budget, not just the port count.
- Confirm each device's PoE standard (802.3af or 802.3at) matches what the switch ports support.
- Check whether you need managed features such as VLANs, PoE scheduling and per-port power cycling.
- Decide whether Gigabit uplinks are enough or whether multi-gig or SFP+ links are needed for access points.
- Confirm the switch fits your rack or desk space and check whether it is fanless if noise matters.
- Verify the warranty, firmware support policy and regional variant's published PoE budget before paying.
FAQ
What is the difference between PoE, PoE+ and PoE++?
PoE (802.3af) delivers up to 15.4 W per port, PoE+ (802.3at) up to 30 W, and PoE++ (802.3bt) higher still. Most access points and fixed cameras run on PoE or PoE+, while PTZ cameras and high-end APs may need PoE+ or PoE++. Check each device's datasheet.
How many cameras can one PoE switch power?
It depends on the total PoE budget, not the port count. Divide the switch's published budget by each camera's wattage, then leave headroom. A switch with a 150 W budget can run several PoE+ cameras, but not 24 at full 30 W each.
Do I need a managed PoE switch for cameras?
Not always. An unmanaged switch works for a simple setup. A managed switch helps when you want VLANs to isolate camera traffic, per-port power cycling, or PoE scheduling. It also makes troubleshooting easier on larger sites.
Can I mix cameras and access points on one PoE switch?
Yes, as long as the total wattage fits the switch's PoE budget and each port supports the device's PoE standard. Separating them with VLANs on a managed switch is good practice for security and traffic control.
Are fanless PoE switches suitable for offices?
Fanless switches are quieter and suit offices and closets, but they usually have lower port counts and PoE budgets. Larger 24-port rack switches often have fans. Check the datasheet for noise and operating temperature.
What should I check before buying a used or refurbished PoE switch?
Confirm the exact model and regional variant, its published PoE budget, firmware support status and warranty terms. Ask whether the power supply is original. For business use, prefer models the vendor still supports with firmware updates.
Sources we checked
Change log: First published 21 Nov 2026.