Skip to main content
Top TechHardware
Collections
Send a correction

PC parts and peripherals

7 Best Thermal Pastes and Pads in 2026

Arctic MX-6 is the best all-round thermal paste for most CPU builds. It suits air coolers and all-in-one liquid coolers, spreads easily, and is priced low enough to keep a spare tube. For high heat and long service life, Thermal Grizzly Kryonaut is the pick. If you want a pad instead of paste, Arctic TP-3 works well for M.2 SSDs and GPU memory.

By · Published 21 Nov 2026

7 products compared

We run no ads and no affiliate links at launch. The order of a list follows our published method. How lists are ordered: how we score.

Prices are the starting prices vendors list publicly. Plans change, so confirm the current price on the vendor page before you buy.

Key takeaways

  • Thermal paste is cheap: a tube usually covers several CPU installs.
  • Pads are reusable and cleaner to apply, but they need the right thickness to make contact.
  • Paste outperforms pads on bare CPU dies because it fills tiny gaps under pressure.
  • Thermal Grizzly Kryonaut is rated for high temperatures but is thicker and harder to spread.
  • Check your cooler's mounting pressure and the pad thickness your device needs before buying.

Side-by-side

Grouped by fit and cost. Tap a product to jump to its full entry.

FitCost
ProductBest forStandout featureListed starting priceFree plan or trial
1Arctic MX-6Most CPU buildsLow price per gramCheck current retail price (4 g tube)One-time hardware purchase
2Thermal Grizzly KryonautHigh-heat overclockingRated for high temperaturesCheck current retail price (1 g syringe)One-time hardware purchase
3Noctua NT-H2Air coolers and quiet buildsGood spreadabilityCheck current retail price (3.5 g tube)One-time hardware purchase
4Arctic TP-3M.2 SSDs and GPU memoryReusableCheck current retail price (100x100x1.0 mm pad)One-time hardware purchase
5Thermalright TF8Budget paste for laptopsLow priceCheck current retail price (2 g tube)One-time hardware purchase
6Gelid GP-ExtremeThick pads for GPUsAvailable in thick sizesCheck current retail price (80x40x1.5 mm pad)One-time hardware purchase
7Cooler Master CryoFuzePre-spread convenienceEasy to applyCheck current retail price (2 g tube)One-time hardware purchase

How we picked

We compared these products using vendor product pages, published data sheets, and manufacturer list prices. We looked at format (paste or pad), rated thermal conductivity where published, available thicknesses for pads, tube or sheet size, and application notes. We did not run lab tests. Prices are manufacturer list prices in USD and can change, so check the vendor site or current retail price before buying. We favored products from brands that publish clear specs and that are still sold in 2026.

The 7 picks in detail

#1

Arctic MX-6

Official site
Screenshot of the Arctic MX-6 website
Vendor homepage, Nov 2026. Source: arctic.de
Best for
Most CPU builds
Standout
Low price per gram
Starting price
Check current retail price (4 g tube)
Free plan or trial
One-time hardware purchase

Arctic MX-6 is a silicone-based paste sold in small tubes and larger syringes. The vendor lists it for CPU and GPU use and rates it for a wide operating temperature range. It spreads smoothly with the included applicator or a card, which helps on large heatspreaders.

The main draw is value. A 4 g tube covers several installs, so it suits first-time builders and anyone servicing a few PCs. It is not the top performer on paper, but for normal air coolers and all-in-one liquid coolers the difference is small.

The catch is that Arctic sells several pastes with similar names, so check the label. Buy from a seller that stocks current packaging.

Where the price comes from

Check current retail price (4 g tube). Hardware prices move often, so check the Arctic MX-6 maker page or a retailer before you buy.

Benefits

  • Low price per gram
  • easy to spread
  • good for air and liquid coolers

Drawbacks

  • Not the highest thermal conductivity in the range
  • tube size varies by region

Use case to skip: this limit matters to you: not the highest thermal conductivity in the range.

Our take. A sensible pick for most CPU builds.

If it does not fit, compare Thermal Grizzly Kryonaut or Noctua NT-H2 in this list.

#2

Thermal Grizzly Kryonaut

Official site
Screenshot of the Thermal Grizzly Kryonaut website
Vendor homepage, Nov 2026. Source: thermal-grizzly.com
Best for
High-heat overclocking
Standout
Rated for high temperatures
Starting price
Check current retail price (1 g syringe)
Free plan or trial
One-time hardware purchase

Thermal Grizzly Kryonaut is a paste aimed at enthusiasts and overclockers. The vendor rates it for high operating temperatures and lists it for CPU and GPU coolers. It comes in small syringes, so you get fewer applications per tube than with budget pastes.

Because it is thicker, it needs firm, even mounting pressure. A thin, even layer works better than a large blob. It suits users pushing high clocks or running hot chips, where every degree matters.

The catch is cost per gram and application difficulty. Beginners may prefer a thinner paste. Check the vendor's temperature rating and application notes before use.

Where the price comes from

Check current retail price (1 g syringe). Hardware prices move often, so check the Thermal Grizzly Kryonaut maker page or a retailer before you buy.

Benefits

  • Rated for high temperatures
  • popular with overclockers
  • stable over time

Drawbacks

  • Thick and harder to spread
  • small syringe for the price

Use case to skip: this limit matters to you: thick and harder to spread.

Our take. A sensible pick for high-heat overclocking.

If it does not fit, compare Arctic MX-6 or Noctua NT-H2 in this list.

#3

Noctua NT-H2

Official site
Screenshot of the Noctua NT-H2 website
Vendor homepage, Nov 2026. Source: noctua.at
Best for
Air coolers and quiet builds
Standout
Good spreadability
Starting price
Check current retail price (3.5 g tube)
Free plan or trial
One-time hardware purchase

Noctua NT-H2 is a paste from a well-known cooler maker. The vendor lists it for CPU coolers and includes cleaning wipes in the box, which helps when swapping coolers. It spreads easily and works with the company's air coolers and liquid cooler line.

It suits quiet builds and air coolers where a clean, even layer matters. The tube is larger than many enthusiast pastes, so it covers several installs.

The catch is price. It costs more than basic pastes, and availability varies. Check that the tube you buy is the NT-H2 version, since Noctua also sells an older NT-H1.

Where the price comes from

Check current retail price (3.5 g tube). Hardware prices move often, so check the Noctua NT-H2 maker page or a retailer before you buy.

Benefits

  • Good spreadability
  • includes cleaning wipes
  • long shelf life claim

Drawbacks

  • Pricier than budget pastes
  • not sold in every region

Use case to skip: this limit matters to you: pricier than budget pastes.

Our take. A sensible pick for air coolers and quiet builds.

If it does not fit, compare Arctic MX-6 or Thermal Grizzly Kryonaut in this list.

#4

Arctic TP-3

Official site
Screenshot of the Arctic TP-3 website
Vendor homepage, Nov 2026. Source: arctic.de
Best for
M.2 SSDs and GPU memory
Standout
Reusable
Starting price
Check current retail price (100x100x1.0 mm pad)
Free plan or trial
One-time hardware purchase

Arctic TP-3 is a thermal pad sold in sheets and in several thicknesses. Pads suit M.2 SSDs, GPU memory, and VRM areas where paste would squeeze out or make a mess. The vendor lists the pad's thermal conductivity and available sizes.

Pads are reusable and easy to cut to size. They work best where the gap between components is fixed, such as under an SSD heatsink.

The catch is thickness. A pad that is too thick lifts the heatsink; one that is too thin leaves an air gap. Measure the gap or check the device manual before buying. Pads also perform below paste on bare CPU dies.

Where the price comes from

Check current retail price (100x100x1.0 mm pad). Hardware prices move often, so check the Arctic TP-3 maker page or a retailer before you buy.

Benefits

  • Reusable
  • clean to apply
  • sold in several thicknesses

Drawbacks

  • Needs exact thickness
  • lower performance than paste on bare dies

Use case to skip: this limit matters to you: needs exact thickness.

Our take. A sensible pick for M.2 SSDs and GPU memory.

If it does not fit, compare Arctic MX-6 or Thermal Grizzly Kryonaut in this list.

#5

Thermalright TF8

Official site
Screenshot of the Thermalright TF8 website
Vendor homepage, Nov 2026. Source: thermalright.com
Best for
Budget paste for laptops
Standout
Low price
Starting price
Check current retail price (2 g tube)
Free plan or trial
One-time hardware purchase

Thermalright TF8 is a paste sold in small tubes at a low price. The vendor lists it for CPU and GPU use, and it is often used on laptops and small dies where a thin layer is enough.

It suits budget builds and laptop repastes where you want a low-cost tube. The consistency is thicker than some pastes, so warm it slightly and spread thin.

The catch is tube size and availability. Check the label and buy from a seller with current stock. It is not the top performer, but it is a solid low-cost option.

Where the price comes from

Check current retail price (2 g tube). Hardware prices move often, so check the Thermalright TF8 maker page or a retailer before you buy.

Benefits

  • Low price
  • good for small dies
  • widely available

Drawbacks

  • Thick consistency
  • small tube

Use case to skip: this limit matters to you: thick consistency.

Our take. A sensible pick for budget paste for laptops.

If it does not fit, compare Arctic MX-6 or Thermal Grizzly Kryonaut in this list.

#6

Gelid GP-Extreme

Official site
GG
Gelid GP-Extreme: no homepage screenshot on file. Check gelid.com.
Best for
Thick pads for GPUs
Standout
Available in thick sizes
Starting price
Check current retail price (80x40x1.5 mm pad)
Free plan or trial
One-time hardware purchase

Gelid GP-Extreme is a thermal pad line sold in several thicknesses. It suits GPU memory and other spots where a thicker pad is needed to bridge a gap. The vendor lists thermal conductivity and available sizes.

Pads like this are reusable and easy to cut. They work well for graphics card memory and power delivery areas.

The catch is fit. Thick pads can push a cooler away from the die if used in the wrong place. Check the card's service manual or teardown notes for the correct thickness. Measure before you cut.

Where the price comes from

Check current retail price (80x40x1.5 mm pad). Hardware prices move often, so check the Gelid GP-Extreme maker page or a retailer before you buy.

Benefits

  • Available in thick sizes
  • good for GPU memory
  • reusable

Drawbacks

  • Thick pads can reduce contact
  • limited sizes in some regions

Use case to skip: this limit matters to you: thick pads can reduce contact.

Our take. A sensible pick for thick pads for GPUs.

If it does not fit, compare Arctic MX-6 or Thermal Grizzly Kryonaut in this list.

#7

Cooler Master CryoFuze

Official site
Screenshot of the Cooler Master CryoFuze website
Vendor homepage, Nov 2026. Source: coolermaster.com
Best for
Pre-spread convenience
Standout
Easy to apply
Starting price
Check current retail price (2 g tube)
Free plan or trial
One-time hardware purchase

Cooler Master CryoFuze is a paste sold in small tubes for CPU coolers. The vendor lists it for CPU use and rates it for a wide temperature range. It spreads easily, which helps beginners get an even layer.

It suits first-time builders and anyone who wants a simple, low-cost paste from a known cooler brand.

The catch is that it is a mid-range paste. Enthusiasts may want a higher-rated option. Check the tube size and the vendor's application notes before buying.

Where the price comes from

Check current retail price (2 g tube). Hardware prices move often, so check the Cooler Master CryoFuze maker page or a retailer before you buy.

Benefits

  • Easy to apply
  • good for beginners
  • sold in small tubes

Drawbacks

  • Not the top performer
  • limited tube sizes

Use case to skip: this limit matters to you: not the top performer.

Our take. A sensible pick for pre-spread convenience.

If it does not fit, compare Arctic MX-6 or Thermal Grizzly Kryonaut in this list.

What specs matter when you buy

Thermal conductivity is the headline number, but it is not the whole story. Vendor figures are measured under lab conditions and are not directly comparable across brands. What matters more is how the paste behaves under your cooler's mounting pressure and whether it stays stable over time. A thin, even layer usually beats a thick blob.

For pads, thickness is the critical spec. Measure the gap between the component and the heatsink, or check the device manual. A pad that is too thick lifts the cooler and hurts contact; one that is too thin leaves an air gap. Pads also have a rated hardness and compressibility, which affect how well they fill gaps.

Consider the application. Paste suits bare CPU dies and heatspreaders under strong mounting pressure. Pads suit M.2 SSDs, GPU memory, and VRM areas where the gap is fixed. Check the operating temperature range, the shelf life claim, and whether cleaning wipes are included. Buy from sellers with current stock, since old tubes can dry out.

Questions worth answering first

Buying checklist

  • Confirm whether your device needs paste or a pad, since they are not interchangeable.
  • Check the pad thickness your device manual specifies before ordering.
  • Read the vendor's rated operating temperature range for the paste.
  • Compare price per gram or per sheet, not just the tube price.
  • Verify the tube or pad is the current model, not an older version.
  • Buy from a seller with current stock to avoid dried-out paste.

FAQ

Is thermal paste better than a thermal pad for a CPU?

Paste generally performs better on a bare CPU die or heatspreader because mounting pressure squeezes it into tiny gaps. Pads are better for fixed gaps like M.2 SSDs and GPU memory. Use paste on the CPU and pads where the manual calls for them.

How often should I replace thermal paste?

Most pastes last several years under normal use. Replace it when you remount the cooler, when temperatures rise unexpectedly, or when the paste looks dried or cracked. Check the vendor's shelf-life and service notes for guidance.

Does a more expensive paste lower temperatures a lot?

The difference between good pastes is often small, a few degrees at most. Mounting pressure, cooler quality, and case airflow matter more. A cheap paste applied well can beat an expensive one applied badly.

Can I use thermal paste on an M.2 SSD?

Paste is messy on an SSD and can squeeze onto the board. A thin thermal pad is the usual choice for M.2 drives. Check the SSD or heatsink manual for the recommended pad thickness.

What thickness pad do I need for a GPU?

It depends on the card. Check the service manual or teardown notes for the exact thickness at each spot. Measure the gap before cutting. A pad that is too thick can reduce contact between the cooler and the GPU die.

Is thermal paste safe to touch?

Most pastes are non-toxic but can irritate skin and eyes. Avoid contact and wash hands after use. Check the safety data sheet on the vendor site for handling and disposal guidance.

Sources we checked

  1. Arctic TP-3 (official site)
  2. Thermal Grizzly Kryonaut (official site)
  3. Noctua NT-H2 (official site)
  4. Thermalright TF8 (official site)
  5. Gelid GP-Extreme (official site)
  6. Cooler Master CryoFuze (official site)

Change log: First published 21 Nov 2026.

Keep reading