Skip to main content
Top TechHardware
Collections
Send a correction

NAS, home server and media

7 Best UPS Units for a NAS or Home Server in 2026

The APC Back-UPS Pro BR1500MS2 is the safest default for most home NAS owners: stepped sine wave output, USB shutdown signaling, and enough capacity for a small server plus network gear. If your NAS has an active PFC power supply, look at the CyberPower CP1500PFCLCD with pure sine wave output. For long runtime on a low-draw NAS, the APC Smart-UPS SMT750RM2UC is the step up.

By · Published 21 Nov 2026

7 products compared

We run no ads and no affiliate links at launch. The order of a list follows our published method. How lists are ordered: how we score.

Prices are the starting prices vendors list publicly. Plans change, so confirm the current price on the vendor page before you buy.

Key takeaways

  • A UPS only protects your data if the NAS can read it: check for a USB or network shutdown signal before buying.
  • Pure sine wave output matters for power supplies with active PFC, common on modern NAS units.
  • Runtime depends on load, not just VA rating; check the vendor runtime chart at your actual wattage.
  • Budget roughly $150-$250 for a tower unit and $400+ for a rackmount or line-interactive model.
  • Replace batteries every three to five years; most vendors publish replacement battery part numbers.

Side-by-side

Grouped by fit and cost. Tap a product to jump to its full entry.

FitCost
ProductBest forStandout featureListed starting priceFree plan or trial
1APC Back-UPS Pro BR1500MS2Most home NAS setupsUSB and serial shutdown signalingCheck current retail priceOne-time hardware purchase
2CyberPower CP1500PFCLCDActive PFC power suppliesPure sine wave outputCheck current retail priceOne-time hardware purchase
3APC Smart-UPS SMT750RM2UCRackmount and small businessPure sine wave outputCheck current retail priceOne-time hardware purchase
4CyberPower PR1500LCDPure sine wave with network card slotPure sine wave outputCheck current retail priceOne-time hardware purchase
5Eaton 5S1500LCDValue line-interactive protectionLCD status displayCheck current retail priceOne-time hardware purchase
6Tripp Lite SMART1500LCDMixed loads with AVRAutomatic voltage regulationCheck current retail priceOne-time hardware purchase
7APC Back-UPS BE850M2Small NAS and router onlyCompact and lightCheck current retail priceOne-time hardware purchase

How we picked

This guide is based on vendor documentation rather than lab testing. We read the published datasheets and user manuals for each model, checked the stated output waveform, capacity, outlet layout, and data ports, and reviewed the runtime charts vendors publish by load. We also checked which NAS vendors document support for each UPS brand's shutdown signaling. Prices are the manufacturer list prices or current retail figures where available, and we noted where a figure should be confirmed on the vendor site.

The 7 picks in detail

#1

APC Back-UPS Pro BR1500MS2

Official site
AB
APC Back-UPS Pro BR1500MS2: no homepage screenshot on file. Check apc.com.
Best for
Most home NAS setups
Standout
USB and serial shutdown signaling
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

A 1500 VA tower unit aimed at home and small office use. APC lists a stepped approximation to a sine wave on the output, which suits most consumer NAS power supplies but not every active PFC design. The rear panel includes battery-backed outlets plus surge-only outlets, and a USB port carries the shutdown signal to the host.

APC publishes runtime charts by load, so check the figure at your NAS idle and peak wattage rather than the headline VA number. The unit ships with PowerChute software for graceful shutdown on Windows and Linux hosts, and NAS vendors document support for USB UPS signaling separately.

The catch is the waveform. If your NAS spec sheet calls for pure sine wave input, move to a line-interactive model instead. Battery replacement is straightforward and APC lists the part number.

Where the price comes from

Check current retail price. Hardware prices move often, so check the APC Back-UPS Pro BR1500MS2 maker page or a retailer before you buy.

Benefits

  • USB and serial shutdown signaling
  • automatic voltage regulation
  • user-replaceable battery

Drawbacks

  • Stepped sine wave output
  • no network management card slot

Use case to skip: this limit matters to you: stepped sine wave output.

Our take. A sensible pick for most home NAS setups.

If it does not fit, compare CyberPower CP1500PFCLCD or APC Smart-UPS SMT750RM2UC in this list.

#2

CyberPower CP1500PFCLCD

Official site
Screenshot of the CyberPower CP1500PFCLCD website
Vendor homepage, Nov 2026. Source: cyberpower.com
Best for
Active PFC power supplies
Standout
Pure sine wave output
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

This is CyberPower's pure sine wave tower model, sized at 1500 VA. It is the usual recommendation when a NAS power supply uses active PFC, because a stepped waveform can cause that type of supply to shut down or behave unpredictably on battery.

The front LCD shows load, battery capacity, and estimated runtime. A USB port connects to the NAS or a small host for shutdown signaling, and CyberPower documents its PowerPanel software for supported operating systems. Outlets are grouped into battery-backed and surge-only sections.

The main catch is physical size and weight, plus the fact that runtime at full load is short. Check the vendor runtime table at your NAS wattage. Battery replacement is user-serviceable.

Where the price comes from

Check current retail price. Hardware prices move often, so check the CyberPower CP1500PFCLCD maker page or a retailer before you buy.

Benefits

  • Pure sine wave output
  • USB shutdown signaling
  • LCD status panel

Drawbacks

  • Tower footprint
  • runtime drops quickly at high load

Use case to skip: this limit matters to you: tower footprint.

Our take. A sensible pick for active PFC power supplies.

If it does not fit, compare APC Back-UPS Pro BR1500MS2 or APC Smart-UPS SMT750RM2UC in this list.

#3

APC Smart-UPS SMT750RM2UC

Official site
AS
APC Smart-UPS SMT750RM2UC: no homepage screenshot on file. Check apc.com.
Best for
Rackmount and small business
Standout
Pure sine wave output
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

A 750 VA line-interactive unit in a 2U rackmount chassis, part of APC's Smart-UPS line. It produces a pure sine wave, which covers active PFC supplies, and includes a SmartSlot for an optional network management card so the UPS can signal a NAS over the network rather than USB.

That network path matters for rack setups where the NAS and UPS sit apart, or where several devices need shutdown coordination. APC documents the management card options and the software that pairs with them.

The trade-off is capacity and price. At 750 VA the runtime is modest, so this suits a single NAS plus switch rather than a full rack. Confirm the runtime chart at your load before committing.

Where the price comes from

Check current retail price. Hardware prices move often, so check the APC Smart-UPS SMT750RM2UC maker page or a retailer before you buy.

Benefits

  • Pure sine wave output
  • 2U rackmount form factor
  • network management card slot

Drawbacks

  • Higher price
  • lower VA rating than tower models

Use case to skip: this limit matters to you: higher price.

Our take. A sensible pick for rackmount and small business.

If it does not fit, compare APC Back-UPS Pro BR1500MS2 or CyberPower CP1500PFCLCD in this list.

#4

CyberPower PR1500LCD

Official site
Screenshot of the CyberPower PR1500LCD website
Vendor homepage, Nov 2026. Source: cyberpower.com
Best for
Pure sine wave with network card slot
Standout
Pure sine wave output
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

Part of CyberPower's Smart App Sinewave line at 1500 VA. It delivers pure sine wave output and includes an expansion slot for an optional network management card, which lets a NAS receive shutdown commands over the LAN.

The LCD reports load level, battery status, and estimated runtime, and the unit includes automatic voltage regulation. CyberPower publishes runtime figures by load, so match the number to your NAS plus attached drives and network gear.

The catch is that the network card is a separate purchase, and software support depends on the operating system your NAS runs. Check the vendor compatibility notes before relying on network shutdown.

Where the price comes from

Check current retail price. Hardware prices move often, so check the CyberPower PR1500LCD maker page or a retailer before you buy.

Benefits

  • Pure sine wave output
  • expansion slot for network card
  • LCD with load and runtime data

Drawbacks

  • Bulky tower
  • software support varies by OS

Use case to skip: this limit matters to you: bulky tower.

Our take. A sensible pick for pure sine wave with network card slot.

If it does not fit, compare APC Back-UPS Pro BR1500MS2 or CyberPower CP1500PFCLCD in this list.

#5

Eaton 5S1500LCD

Official site
E5
Eaton 5S1500LCD: no homepage screenshot on file. Check eaton.com.
Best for
Value line-interactive protection
Standout
LCD status display
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

Eaton's 5S series is a line-interactive tower line aimed at small office and home use. The 1500 VA model includes an LCD for load and battery status, USB signaling for shutdown, and automatic voltage regulation for brownout conditions.

Eaton documents the output waveform for this series, so check it against your NAS power supply requirement before buying. The unit is a straightforward tower design with battery-backed outlets and surge-only outlets.

The catch is the waveform and the smaller software ecosystem compared with APC and CyberPower. If your NAS documentation names specific UPS brands for shutdown support, verify Eaton is on the list.

Where the price comes from

Check current retail price. Hardware prices move often, so check the Eaton 5S1500LCD maker page or a retailer before you buy.

Benefits

  • LCD status display
  • USB shutdown signaling
  • automatic voltage regulation

Drawbacks

  • Stepped waveform
  • limited software ecosystem

Use case to skip: this limit matters to you: stepped waveform.

Our take. A sensible pick for value line-interactive protection.

If it does not fit, compare APC Back-UPS Pro BR1500MS2 or CyberPower CP1500PFCLCD in this list.

#6

Tripp Lite SMART1500LCD

Official site
Screenshot of the Tripp Lite SMART1500LCD website
Vendor homepage, Nov 2026. Source: tripplite.eaton.com
Best for
Mixed loads with AVR
Standout
Automatic voltage regulation
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

A 1500 VA line-interactive tower unit from Tripp Lite, now part of Eaton. It includes automatic voltage regulation, an LCD for status, and USB signaling for shutdown software. Outlets are split between battery-backed and surge-only.

Tripp Lite publishes runtime charts by load and documents the output waveform for the series. The unit suits a NAS plus router, switch, and modem on the same battery section, which is often the practical goal for a home server closet.

The catch is the same as other stepped-waveform towers: confirm your NAS power supply tolerates it. Also check the shutdown software support for your NAS operating system.

Where the price comes from

Check current retail price. Hardware prices move often, so check the Tripp Lite SMART1500LCD maker page or a retailer before you buy.

Benefits

  • Automatic voltage regulation
  • LCD display
  • USB signaling

Drawbacks

  • Stepped waveform
  • tower footprint

Use case to skip: this limit matters to you: stepped waveform.

Our take. A sensible pick for mixed loads with AVR.

If it does not fit, compare APC Back-UPS Pro BR1500MS2 or CyberPower CP1500PFCLCD in this list.

#7

APC Back-UPS BE850M2

Official site
AB
APC Back-UPS BE850M2: no homepage screenshot on file. Check apc.com.
Best for
Small NAS and router only
Standout
Compact and light
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

An 850 VA compact tower for light loads. It suits a two-bay NAS, a router, and a modem, where total draw stays low. APC lists USB signaling for shutdown and automatic voltage regulation on this model.

Runtime is the limiting factor. At a small load the unit buys enough time for a clean shutdown, which is the actual goal for most home setups. Do not expect to ride out a long outage with a NAS and drives attached.

The catch is capacity and waveform. Check the vendor runtime chart at your NAS wattage, and confirm the output waveform suits your power supply before buying.

Where the price comes from

Check current retail price. Hardware prices move often, so check the APC Back-UPS BE850M2 maker page or a retailer before you buy.

Benefits

  • Compact and light
  • USB shutdown signaling
  • low entry price

Drawbacks

  • Small capacity
  • short runtime at load

Use case to skip: this limit matters to you: small capacity.

Our take. A sensible pick for small NAS and router only.

If it does not fit, compare APC Back-UPS Pro BR1500MS2 or CyberPower CP1500PFCLCD in this list.

What specs matter when you buy

Start with the shutdown signal, not the VA rating. A UPS that cannot tell the NAS to shut down only delays the crash. Look for a USB or serial data port with documented support from your NAS vendor, or a network management card slot if the UPS and NAS sit apart. Check the NAS compatibility list before buying, because support varies by model and firmware.

Next, match the waveform to the power supply. Modern NAS units often use active PFC supplies, and those can misbehave on a stepped or square-wave output. If your NAS spec sheet calls for pure sine wave input, buy a pure sine wave UPS. Tower models with pure sine wave output cost more than stepped-wave equivalents at the same VA rating.

Then size by watts, not volt-amperes. Add up the NAS, drives, switch, router, and modem, and read the vendor runtime chart at that figure. A 1500 VA unit may give only a few minutes at high load. Decide whether you need two minutes for a clean shutdown or twenty minutes to ride out short outages. Finally, check battery replacement: confirm the vendor publishes a replacement battery part number and that the battery is user-serviceable.

Questions worth answering first

Buying checklist

  • Confirm your NAS vendor documents shutdown support for the UPS brand and connection type you plan to use.
  • Check whether your NAS power supply requires pure sine wave input before choosing a stepped-waveform model.
  • Add up the wattage of the NAS, drives, switch, router, and modem to size the unit correctly.
  • Read the vendor runtime chart at your actual load, not the headline VA rating.
  • Decide between USB signaling and a network management card based on where the UPS and NAS sit.
  • Confirm a replacement battery part number is published and the battery is user-serviceable.

FAQ

Does a NAS need a pure sine wave UPS?

Not always. Many NAS power supplies work with a stepped approximation to a sine wave. But units with active PFC supplies can shut down or behave unpredictably on stepped output. Check your NAS spec sheet and the UPS datasheet before buying.

How much runtime do I need for a NAS?

Enough time for a clean shutdown is the minimum, usually a few minutes. If you want to ride out short outages, size for longer. Read the vendor runtime chart at your actual wattage rather than the VA rating.

Can a UPS shut down my NAS automatically?

Yes, if the UPS has a data connection and your NAS software supports it. USB signaling is common on consumer units. Rack setups often use a network management card so the UPS can signal the NAS over the LAN.

How often should I replace UPS batteries?

Most vendors recommend replacement every three to five years, depending on temperature and cycling. Check whether the model has a published replacement battery part number and whether the battery is user-serviceable.

Is a bigger VA rating always better?

No. Runtime depends on load in watts, and a large unit at low load may be inefficient. Size to your actual load plus headroom, and check the runtime chart at that figure.

Can I plug a laser printer into a UPS?

Generally no. Laser printers draw high surge current and many vendors advise against battery-backed connection. Use a surge-only outlet if the unit provides one, and check the vendor manual.

Sources we checked

  1. APC Back-UPS BE850M2 (official site)
  2. CyberPower PR1500LCD (official site)
  3. Eaton 5S1500LCD (official site)
  4. Tripp Lite SMART1500LCD (official site)

Change log: First published 21 Nov 2026.

Keep reading