Skip to main content
Top TechHardware
Collections
Send a correction

3D printing and CAD

7 Best 3D Printing Resins for Resin Printers in 2026

Elegoo Standard Resin is the best all-round pick for most people starting with resin printing. It suits general models, miniatures and prototypes where low cost and easy handling matter more than extreme strength. For durable functional parts, Anycubic Tough Resin is the stronger choice. For fine miniatures and tabletop figures, Sunlu ABS-Like Resin offers good detail with a less brittle finished part.

By · Published 22 Nov 2026

7 products compared

We run no ads and no affiliate links at launch. The order of a list follows our published method. How lists are ordered: how we score.

Prices are the starting prices vendors list publicly. Plans change, so confirm the current price on the vendor page before you buy.

Key takeaways

  • Standard resins are cheapest and easiest to print but brittle; expect roughly 1 kg bottles.
  • Water-washable resins cut out isopropyl alcohol but still need curing under UV light.
  • Tough and ABS-like resins trade some detail sharpness for impact resistance.
  • Flexible resins suit gaskets and grips but print slower and need careful support removal.
  • Every resin needs gloves, ventilation and proper disposal; check local rules.

Side-by-side

Grouped by fit and cost. Tap a product to jump to its full entry.

FitCost
ProductBest forStandout featureListed starting priceFree plan or trial
1Elegoo Standard ResinEveryday models and miniaturesWidely available in many colorsCheck current retail price (1 kg bottle)One-time hardware purchase
2Anycubic Tough ResinFunctional parts that take impactBetter impact resistance than standard resinCheck current retail price (1 kg bottle)One-time hardware purchase
3Sunlu ABS-Like ResinDetailed miniatures with less brittlenessGood detail reproductionCheck current retail price (1 kg bottle)One-time hardware purchase
4Elegoo Water-Washable ResinEasy cleanup without alcoholCleans with water instead of IPACheck current retail price (1 kg bottle)One-time hardware purchase
5Anycubic Plant-Based ResinLower-odor general printingReduced odor compared with standard resinCheck current retail price (1 kg bottle)One-time hardware purchase
6Siraya Tech BluEngineering and mechanical partsFormulated for mechanical strengthCheck current retail price (1 kg bottle)One-time hardware purchase
7Phrozen Aqua Gray 8KHigh-detail display modelsFormulated for high-resolution printersCheck current retail price (1 kg bottle)One-time hardware purchase

How we picked

This guide is based on research, not lab testing. We reviewed vendor product pages, published spec sheets and resin profile documentation for each brand, and checked which products are currently listed for sale. We compared resin family, intended use, bottle size, stated compatibility and published price positioning. Where a figure was unclear, we described it qualitatively rather than guessing. No hands-on prints were made for this article.

The 7 picks in detail

#1

Elegoo Standard Resin

Official site
Screenshot of the Elegoo Standard Resin website
Vendor homepage, Nov 2026. Source: elegoo.com
Best for
Everyday models and miniatures
Standout
Widely available in many colors
Starting price
Check current retail price (1 kg bottle)
Free plan or trial
One-time hardware purchase

Elegoo Standard Resin is a general-purpose photopolymer for LCD and MSLA printers. The vendor lists it for models, miniatures and prototypes, and it comes in 1 kg bottles in a range of colors including gray, black, white and clear. It is a common first resin because it is inexpensive and prints predictably on mainstream machines.

The main catch is brittleness. Thin parts can snap under load, so it suits display pieces more than functional parts. It also has a noticeable smell, so ventilation matters. Cure times depend on your printer and layer height, so follow the vendor's exposure guidance rather than a single fixed number.

Where the price comes from

Check current retail price (1 kg bottle). Hardware prices move often, so check the Elegoo Standard Resin maker page or a retailer before you buy.

Benefits

  • Widely available in many colors
  • low cost per bottle
  • works on most LCD printers

Drawbacks

  • Brittle finished parts
  • strong odor during printing

Use case to skip: this limit matters to you: brittle finished parts.

Our take. A sensible pick for everyday models and miniatures.

If it does not fit, compare Anycubic Tough Resin or Sunlu ABS-Like Resin in this list.

#2

Anycubic Tough Resin

Official site
Screenshot of the Anycubic Tough Resin website
Vendor homepage, Nov 2026. Source: anycubic.com
Best for
Functional parts that take impact
Standout
Better impact resistance than standard resin
Starting price
Check current retail price (1 kg bottle)
Free plan or trial
One-time hardware purchase

Anycubic Tough Resin is aimed at parts that must survive drops and stress. The vendor markets it for functional components, and it is a reasonable step up from standard resin when a print needs to flex slightly rather than shatter. It is sold in 1 kg bottles.

It costs more than basic resin and rewards careful exposure calibration. Overexposure can reduce the toughness benefit, so run exposure tests before a large print. It still needs washing and final UV curing like any resin.

Where the price comes from

Check current retail price (1 kg bottle). Hardware prices move often, so check the Anycubic Tough Resin maker page or a retailer before you buy.

Benefits

  • Better impact resistance than standard resin
  • good for brackets and housings
  • available in several colors

Drawbacks

  • Higher cost than standard resin
  • needs careful exposure tuning

Use case to skip: this limit matters to you: higher cost than standard resin.

Our take. A sensible pick for functional parts that take impact.

If it does not fit, compare Elegoo Standard Resin or Sunlu ABS-Like Resin in this list.

#3

Sunlu ABS-Like Resin

Official site
Screenshot of the Sunlu ABS-Like Resin website
Vendor homepage, Nov 2026. Source: sunlu.com
Best for
Detailed miniatures with less brittleness
Standout
Good detail reproduction
Starting price
Check current retail price (1 kg bottle)
Free plan or trial
One-time hardware purchase

Sunlu ABS-Like Resin is a photopolymer formulated to behave more like ABS plastic after curing. It holds fine detail well, which makes it popular for tabletop miniatures and small models. It is sold in 1 kg bottles and works with common LCD printers.

It is not true ABS, so do not expect identical mechanical behavior. It still needs washing in isopropyl alcohol and a final cure. Ventilation is important because the uncured resin has a strong smell.

Where the price comes from

Check current retail price (1 kg bottle). Hardware prices move often, so check the Sunlu ABS-Like Resin maker page or a retailer before you buy.

Benefits

  • Good detail reproduction
  • less brittle than standard resin
  • broad printer compatibility

Drawbacks

  • Odor during printing
  • post-cure still required

Use case to skip: this limit matters to you: odor during printing.

Our take. A sensible pick for detailed miniatures with less brittleness.

If it does not fit, compare Elegoo Standard Resin or Anycubic Tough Resin in this list.

#4

Elegoo Water-Washable Resin

Official site
Screenshot of the Elegoo Water-Washable Resin website
Vendor homepage, Nov 2026. Source: elegoo.com
Best for
Easy cleanup without alcohol
Standout
Cleans with water instead of IPA
Starting price
Check current retail price (1 kg bottle)
Free plan or trial
One-time hardware purchase

Elegoo Water-Washable Resin is designed to be cleaned in water rather than isopropyl alcohol. That simplifies the workflow and reduces solvent cost. The vendor sells it in 1 kg bottles in several colors.

The catch is disposal. Wash water contains uncured resin and must not go down the drain. Let solids settle, cure the residue, and dispose of it as hazardous waste under local rules. Detail is good but generally a little softer than the sharpest standard resins.

Where the price comes from

Check current retail price (1 kg bottle). Hardware prices move often, so check the Elegoo Water-Washable Resin maker page or a retailer before you buy.

Benefits

  • Cleans with water instead of IPA
  • lower odor than standard resin
  • simple workflow for beginners

Drawbacks

  • Wastewater needs careful disposal
  • slightly softer detail than standard resin

Use case to skip: this limit matters to you: wastewater needs careful disposal.

Our take. A sensible pick for easy cleanup without alcohol.

If it does not fit, compare Elegoo Standard Resin or Anycubic Tough Resin in this list.

#5

Anycubic Plant-Based Resin

Official site
Screenshot of the Anycubic Plant-Based Resin website
Vendor homepage, Nov 2026. Source: anycubic.com
Best for
Lower-odor general printing
Standout
Reduced odor compared with standard resin
Starting price
Check current retail price (1 kg bottle)
Free plan or trial
One-time hardware purchase

Anycubic Plant-Based Resin uses plant-derived material in its formulation and is marketed for lower odor. It suits home users who print in a room where smell is a concern. It comes in 1 kg bottles.

Lower odor does not mean safe to handle bare-handed. Wear nitrile gloves, keep the area ventilated, and cure prints fully. Strength is closer to standard resin than to tough resin, so use it for models rather than load-bearing parts.

Where the price comes from

Check current retail price (1 kg bottle). Hardware prices move often, so check the Anycubic Plant-Based Resin maker page or a retailer before you buy.

Benefits

  • Reduced odor compared with standard resin
  • plant-derived formulation
  • good for home setups

Drawbacks

  • Still requires gloves and ventilation
  • mechanical strength is modest

Use case to skip: this limit matters to you: still requires gloves and ventilation.

Our take. A sensible pick for lower-odor general printing.

If it does not fit, compare Elegoo Standard Resin or Anycubic Tough Resin in this list.

#6

Siraya Tech Blu

Official site
Screenshot of the Siraya Tech Blu website
Vendor homepage, Nov 2026. Source: siraya.tech
Best for
Engineering and mechanical parts
Standout
Formulated for mechanical strength
Starting price
Check current retail price (1 kg bottle)
Free plan or trial
One-time hardware purchase

Siraya Tech Blu is an engineering-oriented resin aimed at functional parts such as gears, jigs and mechanical prototypes. The vendor positions it for strength and dimensional stability rather than display detail. It is sold in 1 kg bottles.

It costs more than standard resin and benefits from exposure testing on your specific printer. It is a sensible choice when a part must hold shape under load, but it is overkill for decorative models.

Where the price comes from

Check current retail price (1 kg bottle). Hardware prices move often, so check the Siraya Tech Blu maker page or a retailer before you buy.

Benefits

  • Formulated for mechanical strength
  • good for functional prototypes
  • popular with engineering hobbyists

Drawbacks

  • Pricier than commodity resins
  • needs tuned exposure for best results

Use case to skip: this limit matters to you: pricier than commodity resins.

Our take. A sensible pick for engineering and mechanical parts.

If it does not fit, compare Elegoo Standard Resin or Anycubic Tough Resin in this list.

#7

Phrozen Aqua Gray 8K

Official site
Screenshot of the Phrozen Aqua Gray 8K website
Vendor homepage, Nov 2026. Source: phrozen3d.com
Best for
High-detail display models
Standout
Formulated for high-resolution printers
Starting price
Check current retail price (1 kg bottle)
Free plan or trial
One-time hardware purchase

Phrozen Aqua Gray 8K is a high-detail resin intended for printers with fine pixel pitch. The gray pigment makes small features easier to see, which helps inspection and painting. It is sold in 1 kg bottles.

The detail benefit depends on your printer. On a low-resolution screen you will not see the full advantage. It also costs more than standard resin, so reserve it for display pieces and masters.

Where the price comes from

Check current retail price (1 kg bottle). Hardware prices move often, so check the Phrozen Aqua Gray 8K maker page or a retailer before you buy.

Benefits

  • Formulated for high-resolution printers
  • gray color shows fine detail
  • good surface finish

Drawbacks

  • Higher price
  • detail advantage depends on printer resolution

Use case to skip: this limit matters to you: higher price.

Our take. A sensible pick for high-detail display models.

If it does not fit, compare Elegoo Standard Resin or Anycubic Tough Resin in this list.

What specs matter when you buy

Start with the resin family. Standard resin is cheap and detailed but brittle. Tough and ABS-like resins resist impact better. Water-washable resin simplifies cleanup but creates wastewater you must dispose of properly. Engineering resins favor strength and stability. Flexible resin suits gaskets and grips but prints slower.

Check compatibility with your printer's light source and screen resolution. Most modern resins target 405 nm LCD and MSLA printers, but confirm on the vendor page. Higher-resolution printers benefit from finer-detail resins, while a low-resolution screen will not show the difference.

Look at bottle size and price per kilogram, not just the sticker price. Note the recommended exposure range and whether the vendor publishes a resin profile for your printer. Consider odor and ventilation needs, especially for home use. Finally, confirm shelf life and storage guidance, because resin degrades if left in the vat or exposed to light.

Questions worth answering first

Buying checklist

  • Confirm the resin is listed as compatible with your printer's light source and resolution.
  • Check the bottle size and price per kilogram, not just the total price.
  • Read the vendor's recommended exposure settings and whether a profile exists for your printer.
  • Decide whether you can handle solvent washing or need water-washable resin.
  • Plan ventilation, gloves and safe disposal before the first print.
  • Check the shelf life and store resin away from light and heat.

FAQ

What is the best resin for beginners?

Elegoo Standard Resin is a common starting point because it is inexpensive, widely available and prints predictably. Water-washable resin is easier to clean up but creates wastewater that needs proper disposal. Whichever you choose, start with small exposure test prints before a large model.

Is water-washable resin safer than standard resin?

It removes the need for isopropyl alcohol, but uncured resin is still a skin and eye irritant. Wash water contains resin solids and must not go down the drain. Cure the residue and dispose of it as hazardous waste according to local rules.

Do I need to cure prints after washing?

Yes. Washing removes uncured resin from the surface, but the part still needs a final UV cure to reach full strength. Follow the vendor's recommended cure time, and avoid overcuring, which can make parts brittle or warp thin features.

Can I mix different resin brands in one vat?

Mixing is possible but unpredictable. Different formulations can cure at different rates and may separate. If you mix, do it in small test batches and run exposure tests. For consistent results, keep one resin type per vat and clean thoroughly when switching.

How long does resin last?

Shelf life depends on the formulation and storage. Keep bottles sealed, away from light and heat, and follow the vendor's stated shelf life. Resin left in a vat for long periods can degrade, so pour it back into the bottle and filter it after printing.

Is tough resin worth the extra cost?

If your parts must survive drops, stress or repeated handling, tough or ABS-like resin is usually worth it. For display models and miniatures, standard resin gives good detail at lower cost. Match the resin family to the job rather than buying the most expensive bottle.

Sources we checked

  1. Elegoo Water-Washable Resin (official site)
  2. Anycubic Plant-Based Resin (official site)
  3. Sunlu ABS-Like Resin (official site)
  4. Siraya Tech Blu (official site)
  5. Phrozen Aqua Gray 8K (official site)

Change log: First published 22 Nov 2026.

Keep reading