7 Best 3D Printer Filament Dryers in 2026
The Sunlu S4 Filament Dryer is the top pick for most hobbyists because it dries up to four spools at once and reaches a higher chamber temperature than single-spool boxes. Choose the Creality Space Pi if you want a low-cost single-spool dryer with a clear display. Choose the Polymaker PolyDryer if you want a modular system that stores spools in sealed boxes after drying.
By Shihab Mia · Published 22 Nov 2026
We run no ads and no affiliate links at launch. The order of a list follows our published method. How lists are ordered: how we score.
Prices are the starting prices vendors list publicly. Plans change, so confirm the current price on the vendor page before you buy.
Key takeaways
- Prices for single-spool dryers generally sit well under $100, while four-spool units cost more; check current retail prices.
- Chamber temperature matters more than fan speed: most filaments dry best between 40 °C and 70 °C depending on polymer.
- Spool capacity ranges from one 1 kg spool to four, so match it to how many colors you print.
- Some dryers include a sealed storage mode so filament stays dry after the cycle ends.
- Check the maximum spool diameter before buying, since large 2 kg and 3 kg spools may not fit.
Side-by-side
Grouped by fit and cost. Tap a product to jump to its full entry.
| Fit | Cost | |||
|---|---|---|---|---|
| Product | Best for | Standout feature | Listed starting price | Free plan or trial |
| 1Sunlu S4 Filament Dryer | Drying several spools at once | Holds up to four 1 kg spools | Check current retail price (four-spool unit) | One-time hardware purchase |
| 2Creality Space Pi Filament Dryer | Budget single-spool drying | Compact single-spool design | Check current retail price (single-spool unit) | One-time hardware purchase |
| 3Polymaker PolyDryer | Modular drying plus sealed storage | Sealed storage boxes keep spools dry | Check current retail price (dryer and storage box system) | One-time hardware purchase |
| 4eSUN eBOX Filament Dryer | Simple entry-level drying | Straightforward controls | Check current retail price (single-spool unit) | One-time hardware purchase |
| 5Sovol SH01 Filament Dryer | Heated drying with storage use | Heated chamber with digital controls | Check current retail price (single-spool unit) | One-time hardware purchase |
| 6Anycubic Filament Dryer Box | Anycubic printer owners | Matches Anycubic printer ecosystem | Check current retail price (single-spool unit) | One-time hardware purchase |
| 7JAYO Filament Dryer Box | Low-cost single-spool drying | Low entry price | Check current retail price (single-spool unit) | One-time hardware purchase |
How we picked
This guide is based on research, not hands-on testing. We reviewed each vendor's product page and published spec sheet for chamber temperature, spool capacity, controls, and storage features, then compared listed prices where the vendor publishes them. We prioritized models released between 2023 and 2025 that are still sold. Where a vendor does not publish a figure, we describe the feature qualitatively rather than estimate a number.
The 7 picks in detail

- Best for
- Drying several spools at once
- Standout
- Holds up to four 1 kg spools
- Starting price
- Check current retail price (four-spool unit)
- Free plan or trial
- One-time hardware purchase
The Sunlu S4 is a four-spool dryer aimed at users who print in several materials or colors. Sunlu lists adjustable heating with a digital control panel and a timer, so you can run a cycle and then leave spools in the chamber. The sealed lid lets it work as a storage box between prints.
It suits small print farms and hobbyists with a shelf of open spools. The main catch is size: it takes up noticeably more room than a single-spool dryer, and the higher price only makes sense if you routinely dry more than one spool.
Where the price comes from
Check current retail price (four-spool unit). Hardware prices move often, so check the Sunlu S4 Filament Dryer maker page or a retailer before you buy.
Benefits
- Holds up to four 1 kg spools
- adjustable chamber temperature
- built-in storage function
Drawbacks
- Larger footprint than single-spool boxes
- needs more counter space
Use case to skip: this limit matters to you: larger footprint than single-spool boxes.
Our take. A sensible pick for drying several spools at once.
If it does not fit, compare Creality Space Pi Filament Dryer or Polymaker PolyDryer in this list.

- Best for
- Budget single-spool drying
- Standout
- Compact single-spool design
- Starting price
- Check current retail price (single-spool unit)
- Free plan or trial
- One-time hardware purchase
The Creality Space Pi is a single-spool dryer with a heated chamber and a front display for setting temperature and time. Creality publishes the temperature range and timer settings on the product page. It is designed to sit next to a printer and feed filament directly during a print.
It suits beginners and anyone who mostly prints one material at a time. The catch is throughput: with one spool slot, drying a full set of colors takes several cycles.
Where the price comes from
Check current retail price (single-spool unit). Hardware prices move often, so check the Creality Space Pi Filament Dryer maker page or a retailer before you buy.
Benefits
- Compact single-spool design
- digital temperature and time controls
- clear display
Drawbacks
- One spool at a time
- limited capacity for multi-color work
Use case to skip: this limit matters to you: one spool at a time.
Our take. A sensible pick for budget single-spool drying.
If it does not fit, compare Sunlu S4 Filament Dryer or Polymaker PolyDryer in this list.

- Best for
- Modular drying plus sealed storage
- Standout
- Sealed storage boxes keep spools dry
- Starting price
- Check current retail price (dryer and storage box system)
- Free plan or trial
- One-time hardware purchase
The Polymaker PolyDryer pairs a heated drying unit with sealed storage boxes. Polymaker describes a design where a spool dries in the unit and then moves into a sealed box for printing and storage, which limits re-absorption of moisture.
It suits users who want a repeatable workflow rather than a single box. The catch is that the modular approach means buying additional boxes as your spool collection grows, so total cost climbs.
Where the price comes from
Check current retail price (dryer and storage box system). Hardware prices move often, so check the Polymaker PolyDryer maker page or a retailer before you buy.
Benefits
- Sealed storage boxes keep spools dry
- modular design
- works with Polymaker spools
Drawbacks
- System cost adds up with extra boxes
- ecosystem-oriented design
Use case to skip: this limit matters to you: system cost adds up with extra boxes.
Our take. A sensible pick for modular drying plus sealed storage.
If it does not fit, compare Sunlu S4 Filament Dryer or Creality Space Pi Filament Dryer in this list.

- Best for
- Simple entry-level drying
- Standout
- Straightforward controls
- Starting price
- Check current retail price (single-spool unit)
- Free plan or trial
- One-time hardware purchase
The eSUN eBOX is a single-spool heated dryer from a filament maker, intended to dry eSUN spools and others of similar size. eSUN lists a heated chamber with a control interface for temperature and time.
It suits buyers who want a no-frills dryer from a known filament brand. The catch is that it offers little beyond basic heating, so users who need multi-spool drying or sealed storage should look elsewhere.
Where the price comes from
Check current retail price (single-spool unit). Hardware prices move often, so check the eSUN eBOX Filament Dryer maker page or a retailer before you buy.
Benefits
- Straightforward controls
- compact footprint
- heats and holds one spool
Drawbacks
- Basic feature set
- single-spool capacity
Use case to skip: this limit matters to you: basic feature set.
Our take. A sensible pick for simple entry-level drying.
If it does not fit, compare Sunlu S4 Filament Dryer or Creality Space Pi Filament Dryer in this list.

- Best for
- Heated drying with storage use
- Standout
- Heated chamber with digital controls
- Starting price
- Check current retail price (single-spool unit)
- Free plan or trial
- One-time hardware purchase
The Sovol SH01 is a single-spool dryer with a heated chamber and digital temperature and timer controls. Sovol positions it as both a dryer and a storage container, so a spool can stay inside after the cycle.
It suits users who want one device for drying and short-term storage. The catch is capacity and fit: confirm that your spool diameter clears the chamber before buying, especially with larger spools.
Where the price comes from
Check current retail price (single-spool unit). Hardware prices move often, so check the Sovol SH01 Filament Dryer maker page or a retailer before you buy.
Benefits
- Heated chamber with digital controls
- doubles as a storage box
- compact design
Drawbacks
- One spool at a time
- check spool diameter fit
Use case to skip: this limit matters to you: one spool at a time.
Our take. A sensible pick for heated drying with storage use.
If it does not fit, compare Sunlu S4 Filament Dryer or Creality Space Pi Filament Dryer in this list.

- Best for
- Anycubic printer owners
- Standout
- Matches Anycubic printer ecosystem
- Starting price
- Check current retail price (single-spool unit)
- Free plan or trial
- One-time hardware purchase
The Anycubic Filament Dryer Box is a heated single-spool dryer sold alongside Anycubic printers and filament. Anycubic lists temperature and timer controls on the product page.
It suits Anycubic owners who want a matching accessory and simple operation. The catch is the same as other single-spool units: it handles one spool at a time, so plan cycles around your print schedule.
Where the price comes from
Check current retail price (single-spool unit). Hardware prices move often, so check the Anycubic Filament Dryer Box maker page or a retailer before you buy.
Benefits
- Matches Anycubic printer ecosystem
- heated drying chamber
- compact form factor
Drawbacks
- Single-spool capacity
- brand-oriented styling
Use case to skip: this limit matters to you: single-spool capacity.
Our take. A sensible pick for anycubic printer owners.
If it does not fit, compare Sunlu S4 Filament Dryer or Creality Space Pi Filament Dryer in this list.

- Best for
- Low-cost single-spool drying
- Standout
- Low entry price
- Starting price
- Check current retail price (single-spool unit)
- Free plan or trial
- One-time hardware purchase
The JAYO Filament Dryer Box is an entry-level heated dryer for a single spool, sold by filament brand JAYO. It offers a heated chamber with basic temperature and time settings.
It suits budget buyers who print occasionally and mainly need to rescue damp PLA or PETG. The catch is limited capability: there is no multi-spool support and few extras beyond heating.
Where the price comes from
Check current retail price (single-spool unit). Hardware prices move often, so check the JAYO Filament Dryer Box maker page or a retailer before you buy.
Benefits
- Low entry price
- compact heated chamber
- simple controls
Drawbacks
- Basic feature set
- one spool at a time
Use case to skip: this limit matters to you: basic feature set.
Our take. A sensible pick for low-cost single-spool drying.
If it does not fit, compare Sunlu S4 Filament Dryer or Creality Space Pi Filament Dryer in this list.
What specs matter when you buy
Chamber temperature is the first spec to check. Different polymers need different drying temperatures, and a dryer that tops out too low will not help with engineering filaments. Compare the vendor's published range against the recommended drying temperature for the materials you actually print, and remember that the chamber temperature is not the same as the filament surface temperature.
Spool capacity and physical fit come next. A dryer rated for one 1 kg spool may not accept a 2 kg or 3 kg spool, and oversized spools are a common source of returns. Check the listed maximum spool diameter and width, not just the weight rating. If you print in several colors, a multi-spool unit saves time even at a higher price.
Finally, look at controls, timer range, and whether the unit doubles as sealed storage. A timer that shuts off automatically is convenient, and a sealed lid slows moisture re-absorption after drying. Power draw is usually modest, but confirm the voltage and plug type for your region. Vendor spec sheets list these details; retailer listings often do not.
Questions worth answering first
Buying checklist
- Confirm the dryer's maximum chamber temperature covers the materials you print.
- Measure your largest spool and compare it with the listed maximum spool diameter.
- Decide whether you need one spool slot or several before comparing prices.
- Check whether the unit can run as sealed storage after the drying cycle.
- Verify the voltage and plug type match your region.
- Read the vendor's warranty terms and confirm spare parts availability.
FAQ
Do filament dryers actually work?
Yes. Many filaments absorb moisture from the air, which causes popping, stringing, and weak parts. A heated chamber drives moisture out over a few hours. Results depend on reaching the right temperature for the polymer, so check the dryer's range against your material.
What temperature should I dry PLA and PETG?
PLA is usually dried at a lower temperature than PETG, and both are lower than engineering filaments. Always follow the filament maker's published drying recommendation rather than a generic figure, and stay below the material's glass transition temperature.
Can I dry filament in a kitchen oven?
Some users do, but ovens often overshoot temperature and can soften or fuse a spool. A dedicated dryer holds a steadier, lower temperature and is safer for the spool. If you use an oven, verify it with a separate thermometer first.
How long does drying take?
It depends on the material, the spool, and the dryer. Vendor guides typically suggest several hours for a damp spool. Thick spools and engineering materials need longer. A timer on the dryer makes it easier to run a full cycle without watching it.
Do I need a dryer if I print PLA only?
PLA is less moisture-sensitive than nylon or TPU, but it still absorbs water over time. If prints pop or string and the spool has been open for months, drying often helps. Occasional printers may not need one.
Can I print directly from a dryer?
Some dryers are designed to feed filament to the printer during a print, which keeps the spool warm and dry. Check the vendor's description for a filament feed path before assuming this works with your setup.
Sources we checked
Change log: First published 22 Nov 2026.