Skip to main content
Top TechHardware
Collections
Send a correction

3D printing and CAD

7 Best Diode Laser Engravers for Hobbyists in 2026

The xTool S1 is our top pick for most hobbyists because it ships as a fully enclosed, Class 1 style machine with a strong feature set and good software support. If you want the lowest entry cost, the Creality Falcon2 Pro 22W is a strong budget option. If you need a larger work area for signs and panels, look at the Ortur Laser Master 3.

By · Published 21 Nov 2026

7 products compared

We run no ads and no affiliate links at launch. The order of a list follows our published method. How lists are ordered: how we score.

Prices are the starting prices vendors list publicly. Plans change, so confirm the current price on the vendor page before you buy.

Key takeaways

  • Diode lasers cut thin wood and dark acrylic but struggle with clear acrylic and bare metal without marking spray.
  • Enclosed models cost more but reduce eye and fume risk compared with open-frame kits.
  • Most hobby units run on 24V power and need a dedicated circuit plus good ventilation.
  • Software is often free: LightBurn is paid, while LaserGRBL and vendor apps are free.
  • Expect to spend extra on an enclosure, air assist and a honeycomb bed on open-frame machines.

Side-by-side

Grouped by fit and cost. Tap a product to jump to its full entry.

FitCost
ProductBest forStandout featureListed starting priceFree plan or trial
1xTool S1Enclosed all-rounder for home useFully enclosed frameCheck current retail price (varies by laser module)One-time hardware purchase
2Creality Falcon2 Pro 22WBudget enclosed machineEnclosed designCheck current retail price (22W version)One-time hardware purchase
3Ortur Laser Master 3Large flat work areaLarge work areaCheck current retail price (base unit)One-time hardware purchase
4AtomStack A5 Pro V2Lowest-cost first machineLow entry priceCheck current retail price (base kit)One-time hardware purchase
5Sculpfun S30 Pro MaxSpeed on a budgetFast engraving speedsCheck current retail price (20W version)One-time hardware purchase
6Longer Ray5 20WMid-size hobby projectsMid-size work areaCheck current retail price (20W kit)One-time hardware purchase
7Two Trees TTS-55 ProSmall crafts and giftsCompact footprintCheck current retail price (base kit)One-time hardware purchase

How we picked

We compared these engravers using vendor product pages, published spec sheets, official documentation and listed prices. We looked at enclosure type, module power, work area, air assist, software compatibility and accessory costs. We did not run hands-on lab tests. Where a figure was unclear or changed by bundle, we described it qualitatively and pointed readers to the vendor site. The ranking weighs safety features and total cost of ownership alongside raw capability.

The 7 picks in detail

#1

xTool S1

Official site
Screenshot of the xTool S1 website
Vendor homepage, Nov 2026. Source: xtool.com
Best for
Enclosed all-rounder for home use
Standout
Fully enclosed frame
Starting price
Check current retail price (varies by laser module)
Free plan or trial
One-time hardware purchase

The S1 is a closed-frame diode engraver aimed at home and small-shop users. The enclosure keeps the beam inside the machine, which matters in rooms with pets or children. xTool sells it with different laser modules, so power and cutting depth depend on the version you buy. The vendor lists air assist and a honeycomb panel as add-ons.

It suits buyers who want a tidy, self-contained unit and are willing to pay more for that. The main catch is cost: the base machine plus a stronger module and accessories adds up quickly. Check the vendor spec sheet for the exact module wattage and work area before ordering.

Where the price comes from

Check current retail price (varies by laser module). Hardware prices move often, so check the xTool S1 maker page or a retailer before you buy.

Benefits

  • Fully enclosed frame
  • strong vendor software
  • wide accessory range

Drawbacks

  • Higher cost than open-frame kits
  • modules sold separately

Use case to skip: this limit matters to you: higher cost than open-frame kits.

Our take. A sensible pick for enclosed all-rounder for home use.

If it does not fit, compare Creality Falcon2 Pro 22W or Ortur Laser Master 3 in this list.

#2

Creality Falcon2 Pro 22W

Official site
Screenshot of the Creality Falcon2 Pro 22W website
Vendor homepage, Nov 2026. Source: creality.com
Best for
Budget enclosed machine
Standout
Enclosed design
Starting price
Check current retail price (22W version)
Free plan or trial
One-time hardware purchase

Creality's Falcon2 Pro is a diode engraver with a built-in enclosure and a 22W laser module in the version most often sold. The vendor lists an integrated air assist and a camera for positioning on some configurations. It runs on standard 24V power and works with Creality's own software plus LightBurn.

It fits hobbyists who want enclosure safety without paying top-tier prices. The catch is that the software and setup take time to learn, and extras like a rotary roller or bed are separate purchases. Confirm which bundle you are buying, since module and accessory combinations differ by region.

Where the price comes from

Check current retail price (22W version). Hardware prices move often, so check the Creality Falcon2 Pro 22W maker page or a retailer before you buy.

Benefits

  • Enclosed design
  • integrated air assist
  • camera option on some versions

Drawbacks

  • Software learning curve
  • accessory pricing adds up

Use case to skip: this limit matters to you: software learning curve.

Our take. A sensible pick for budget enclosed machine.

If it does not fit, compare xTool S1 or Ortur Laser Master 3 in this list.

#3

Ortur Laser Master 3

Official site
OL
Ortur Laser Master 3: no homepage screenshot on file. Check ortur.com.
Best for
Large flat work area
Standout
Large work area
Starting price
Check current retail price (base unit)
Free plan or trial
One-time hardware purchase

The Laser Master 3 is an open-frame diode engraver with a larger-than-average bed, which suits signs, panels and batch work. Ortur lists a rigid frame and a focus system designed for quick setup. It works with LaserGRBL and LightBurn.

It suits makers who need space more than portability. The main catch is safety: an open frame means you should add an enclosure and eye protection, and air assist is not built in. Budget for those extras when comparing total cost against enclosed machines.

Where the price comes from

Check current retail price (base unit). Hardware prices move often, so check the Ortur Laser Master 3 maker page or a retailer before you buy.

Benefits

  • Large work area
  • solid frame
  • good community support

Drawbacks

  • Open frame needs an enclosure
  • no built-in air assist

Use case to skip: this limit matters to you: open frame needs an enclosure.

Our take. A sensible pick for large flat work area.

If it does not fit, compare xTool S1 or Creality Falcon2 Pro 22W in this list.

#4

AtomStack A5 Pro V2

Official site
Screenshot of the AtomStack A5 Pro V2 website
Vendor homepage, Nov 2026. Source: atomstack.com
Best for
Lowest-cost first machine
Standout
Low entry price
Starting price
Check current retail price (base kit)
Free plan or trial
One-time hardware purchase

The A5 Pro V2 is a compact open-frame diode engraver aimed at beginners. AtomStack lists a modest work area and a fixed-focus module, which keeps the price down. It connects over USB and works with LaserGRBL and LightBurn.

It suits people who want to try engraving on small items like coasters, tags and phone cases before spending more. The catch is limited capability: the small bed and lower power restrict what you can cut, and the open frame means you must manage fumes and eye safety yourself. Treat it as a starter machine, not a production unit.

Where the price comes from

Check current retail price (base kit). Hardware prices move often, so check the AtomStack A5 Pro V2 maker page or a retailer before you buy.

Benefits

  • Low entry price
  • simple assembly
  • LightBurn compatible

Drawbacks

  • Small work area
  • open frame with limited safety features

Use case to skip: this limit matters to you: small work area.

Our take. A sensible pick for lowest-cost first machine.

If it does not fit, compare xTool S1 or Creality Falcon2 Pro 22W in this list.

#5

Sculpfun S30 Pro Max

Official site
Screenshot of the Sculpfun S30 Pro Max website
Vendor homepage, Nov 2026. Source: sculpfun.com
Best for
Speed on a budget
Standout
Fast engraving speeds
Starting price
Check current retail price (20W version)
Free plan or trial
One-time hardware purchase

The S30 Pro Max is an open-frame diode engraver that Sculpfun sells with a higher-power module and air assist included. The vendor highlights fast engraving speeds and a sturdy frame. It works with LightBurn and LaserGRBL.

It suits hobbyists who want throughput without paying enclosed-machine prices. The catch is the open frame: you still need eye protection and ventilation, and the kit takes time to assemble and align. Check the vendor page for the exact module power and work area of the version on sale.

Where the price comes from

Check current retail price (20W version). Hardware prices move often, so check the Sculpfun S30 Pro Max maker page or a retailer before you buy.

Benefits

  • Fast engraving speeds
  • air assist included
  • good value

Drawbacks

  • Open frame
  • assembly takes time

Use case to skip: this limit matters to you: open frame.

Our take. A sensible pick for speed on a budget.

If it does not fit, compare xTool S1 or Creality Falcon2 Pro 22W in this list.

#6

Longer Ray5 20W

Official site
LR
Longer Ray5 20W: no homepage screenshot on file. Check longer3d.com.
Best for
Mid-size hobby projects
Standout
Mid-size work area
Starting price
Check current retail price (20W kit)
Free plan or trial
One-time hardware purchase

The Ray5 is a diode engraver from Longer, sold in several power versions with a 20W module among them. Some configurations include a touchscreen for offline control. It works with LightBurn and vendor software.

It suits hobbyists doing mid-size signs, boxes and gifts who want a balance of price and bed size. The catch is that features vary by bundle, and the open frame means you supply your own enclosure and fume handling. Confirm the module power and bed size on the listing before buying.

Where the price comes from

Check current retail price (20W kit). Hardware prices move often, so check the Longer Ray5 20W maker page or a retailer before you buy.

Benefits

  • Mid-size work area
  • touchscreen control on some versions
  • reasonable price

Drawbacks

  • Open frame
  • accessory-dependent features

Use case to skip: this limit matters to you: open frame.

Our take. A sensible pick for mid-size hobby projects.

If it does not fit, compare xTool S1 or Creality Falcon2 Pro 22W in this list.

#7

Two Trees TTS-55 Pro

Official site
Screenshot of the Two Trees TTS-55 Pro website
Vendor homepage, Nov 2026. Source: twotrees3d.com
Best for
Small crafts and gifts
Standout
Compact footprint
Starting price
Check current retail price (base kit)
Free plan or trial
One-time hardware purchase

The TTS-55 Pro is a compact open-frame diode engraver from Two Trees. It is aimed at small crafts such as keychains, tags and small plaques. It works with LaserGRBL and LightBurn.

It suits buyers with limited desk space who want to test the hobby cheaply. The catch is the small bed and modest power, which limit project size and cutting. As with all open-frame units, plan for eye protection and ventilation. Check the vendor page for the current module and work area.

Where the price comes from

Check current retail price (base kit). Hardware prices move often, so check the Two Trees TTS-55 Pro maker page or a retailer before you buy.

Benefits

  • Compact footprint
  • low price
  • simple setup

Drawbacks

  • Small work area
  • basic safety features

Use case to skip: this limit matters to you: small work area.

Our take. A sensible pick for small crafts and gifts.

If it does not fit, compare xTool S1 or Creality Falcon2 Pro 22W in this list.

What specs matter when you buy

Laser power in watts is the first number buyers look at, but it is not the whole story. A higher-wattage module cuts faster and deeper on wood, but spot size, focus and air assist matter just as much for clean results. For engraving only, a lower-power module is often enough. For cutting thin plywood or dark acrylic, more power helps, but diode lasers still struggle with clear acrylic and bare metal without a marking spray.

Work area decides what you can make. A small bed suits tags and coasters; a larger bed suits signs and panels. Check the actual engraving area, not the frame size. Also check the machine's power supply and whether it needs a dedicated circuit.

Safety and enclosure are the specs most often overlooked. Open-frame machines expose the beam and fumes, so an enclosure, eye protection and ventilation are practical necessities, not extras. Enclosed models reduce that risk but cost more. Finally, check software support: LightBurn is paid but widely supported, while LaserGRBL and vendor apps are free. Confirm the machine works with the software you plan to use.

Questions worth answering first

Buying checklist

  • Confirm the exact laser module wattage and work area for the bundle you are buying.
  • Decide whether you need an enclosed machine or will add an enclosure to an open frame.
  • Check that the machine works with your preferred software, such as LightBurn or LaserGRBL.
  • Budget for air assist, a honeycomb bed and eye protection if not included.
  • Plan ventilation for fumes, especially for wood and acrylic.
  • Confirm the power supply requirements and warranty terms on the vendor site.

FAQ

Are diode lasers safe for home use?

They can be used at home with care. The beam can damage eyes, and fumes need venting. Enclosed machines reduce risk, and open-frame units should be used with an enclosure, eye protection and ventilation. Follow the vendor's safety instructions.

Can a diode laser cut clear acrylic?

Generally no. Diode laser light passes through clear acrylic rather than cutting it. Dark or colored acrylic cuts better. For clear acrylic, other laser types are usually needed.

Do I need LightBurn?

No. Many machines work with free software such as LaserGRBL or the vendor's own app. LightBurn is paid but offers more layout and control features. Check compatibility before buying.

What can a hobby diode laser engrave?

Common materials include wood, leather, cardboard, some plastics and coated metal with a marking spray. Results vary by material and module power. Test on scrap first.

How much space do I need?

It depends on the bed size. Small machines fit on a desk, while larger beds need more room plus space for ventilation and access. Measure the frame and add clearance before ordering.

Is a higher wattage always better?

Not always. Higher power cuts faster but costs more and can be overkill for engraving. Match the module to your main material and project size, and factor in air assist and focus quality.

Sources we checked

  1. xTool S1 (official site)
  2. Creality Falcon2 Pro 22W (official site)
  3. Ortur Laser Master 3 (official site)
  4. AtomStack A5 Pro V2 (official site)
  5. Sculpfun S30 Pro Max (official site)
  6. Longer Ray5 20W (official site)
  7. Two Trees TTS-55 Pro (official site)

Change log: First published 21 Nov 2026.

Keep reading