Skip to main content
Top TechHardware
Collections
Send a correction

3D printing and CAD

7 Best Multicolor 3D Printers in 2026

The Bambu Lab P1S with AMS is the best starting point for most buyers who want multicolor printing with minimal fuss, because it pairs a fast enclosed coreXY printer with a four-spool automatic material system. For a larger build volume, look at the Creality K2 Plus Combo. If you prefer an open-frame printer and a lower entry price, the Bambu Lab A1 with AMS Lite is the alternative.

By · Published 21 Nov 2026

7 products compared

We run no ads and no affiliate links at launch. The order of a list follows our published method. How lists are ordered: how we score.

Prices are the starting prices vendors list publicly. Plans change, so confirm the current price on the vendor page before you buy.

Key takeaways

  • Multicolor printing almost always means a filament changer or material system, not a special hotend; budget for the combo, not the base printer.
  • The Bambu Lab P1S Combo and Creality K2 Plus Combo bundle a four-spool AMS; the A1 uses the lighter AMS Lite.
  • Prusa's Core One and XL take a different route: the XL uses up to five toolheads, which avoids purge waste but costs far more.
  • Purge and wipe towers waste filament on single-nozzle systems; toolchangers reduce this but add cost and calibration time.
  • Check that the material system supports the filaments you plan to use, since some units are limited to PLA and PETG.

Side-by-side

Grouped by fit and cost. Tap a product to jump to its full entry.

FitCost
ProductBest forStandout featureListed starting priceFree plan or trial
1Bambu Lab P1S with AMSFast enclosed multicolor printing with little setupEnclosed coreXY frame suits engineering filamentsCheck current retail price (combo with AMS)One-time hardware purchase
2Bambu Lab A1 with AMS LiteLower-cost open-frame multicolor printingBed-slinger design is simple to maintainCheck current retail price (combo with AMS Lite)One-time hardware purchase
3Creality K2 Plus ComboLarge multicolor parts in an enclosed frameLarge build volume for big multicolor modelsCheck current retail price (combo with CFS)One-time hardware purchase
4Prusa Core OnePrusa ecosystem users who want an enclosed coreXYEnclosed coreXY designCheck current retail price (printer; material system sold separately)One-time hardware purchase
5Prusa XLToolchanger multicolor with minimal purge wasteToolchanger design avoids most purge wasteCheck current retail price (varies by toolhead count)One-time hardware purchase
6Anycubic Kobra 3 ComboCheapest route to four-color printingLow combo price for four-color printingCheck current retail price (combo with ACE Pro)One-time hardware purchase
7Elegoo Centauri CarbonEnclosed coreXY base for buyers who add color laterEnclosed coreXY frame at a competitive priceCheck current retail price (printer only)One-time hardware purchase

How we picked

This guide is based on vendor product pages, published spec sheets, official documentation and listed prices, not hands-on testing. We selected printers released between 2023 and 2025 that are still sold and that support multicolor through a bundled or optional material system. We compared build volume, frame type, number of colors, purge behavior, slicer support and repairability, then grouped the machines by buyer type. Prices are shown as check-current-retail notes because listings and bundles change often.

The 7 picks in detail

#1

Bambu Lab P1S with AMS

Official site
Screenshot of the Bambu Lab P1S with AMS website
Vendor homepage, Nov 2026. Source: bambulab.com
Best for
Fast enclosed multicolor printing with little setup
Standout
Enclosed coreXY frame suits engineering filaments
Starting price
Check current retail price (combo with AMS)
Free plan or trial
One-time hardware purchase

The P1S is an enclosed coreXY printer with a heated bed and a steel panel frame. Bundled with the AMS, it holds four spools and switches filament automatically during a print. The vendor lists a 256 x 256 x 256 mm build volume, which suits most hobby and functional parts.

Bambu Studio handles color assignment per model, and the printer ships with tuned profiles for common filaments. The main catch is waste: every color change purges filament into a tower or flush bin, so multicolor prints use more material than single-color ones. The AMS also raises the price well above the base printer.

It suits buyers who want multicolor results without building or tuning a machine. Check the current combo price and confirm the AMS version you order matches your region's power and shipping options.

Where the price comes from

Check current retail price (combo with AMS). Hardware prices move often, so check the Bambu Lab P1S with AMS maker page or a retailer before you buy.

Benefits

  • Enclosed coreXY frame suits engineering filaments
  • AMS holds four spools and dries nothing but manages swaps
  • strong first-party slicer and profiles

Drawbacks

  • Purge waste on color changes
  • AMS adds significant cost over the base printer

Use case to skip: this limit matters to you: purge waste on color changes.

Our take. A sensible pick for fast enclosed multicolor printing with little setup.

If it does not fit, compare Bambu Lab A1 with AMS Lite or Creality K2 Plus Combo in this list.

#2

Bambu Lab A1 with AMS Lite

Official site
Screenshot of the Bambu Lab A1 with AMS Lite website
Vendor homepage, Nov 2026. Source: bambulab.com
Best for
Lower-cost open-frame multicolor printing
Standout
Bed-slinger design is simple to maintain
Starting price
Check current retail price (combo with AMS Lite)
Free plan or trial
One-time hardware purchase

The A1 is an open-frame bed-slinger. Its AMS Lite holds four spools on a lighter frame than the full AMS and mounts above the printer. The vendor lists a 256 x 256 x 256 mm build volume, the same footprint class as the P1S.

Because it is open, the A1 is best for PLA and PETG rather than high-temperature engineering plastics. It includes automatic bed leveling and input shaping, which the vendor credits for fast print speeds. Multicolor prints still generate purge waste.

It suits hobbyists and families who want four-color printing at a lower entry price and do not need an enclosure. Confirm the combo listing includes the AMS Lite, since the printer is also sold alone.

Where the price comes from

Check current retail price (combo with AMS Lite). Hardware prices move often, so check the Bambu Lab A1 with AMS Lite maker page or a retailer before you buy.

Benefits

  • Bed-slinger design is simple to maintain
  • AMS Lite holds four spools
  • full-auto bed leveling and vibration compensation

Drawbacks

  • Open frame limits high-temperature materials
  • no enclosure for drafts or fumes

Use case to skip: this limit matters to you: open frame limits high-temperature materials.

Our take. A sensible pick for lower-cost open-frame multicolor printing.

If it does not fit, compare Bambu Lab P1S with AMS or Creality K2 Plus Combo in this list.

#3

Creality K2 Plus Combo

Official site
Screenshot of the Creality K2 Plus Combo website
Vendor homepage, Nov 2026. Source: creality.com
Best for
Large multicolor parts in an enclosed frame
Standout
Large build volume for big multicolor models
Starting price
Check current retail price (combo with CFS)
Free plan or trial
One-time hardware purchase

The K2 Plus is an enclosed coreXY printer sold as a combo with Creality's CFS four-spool material system. The vendor lists a 350 x 350 x 350 mm build volume, notably larger than the Bambu Lab machines here, which matters for helmets, cosplay parts and large functional assemblies.

The enclosure helps with warp-prone filaments and keeps drafts off the print. The CFS handles four colors and works with Creality's slicer profiles. As with any single-nozzle changer, color changes purge filament.

It suits makers who need size and multicolor in one machine and have room for a large printer. Check the current combo price and confirm the CFS is included rather than sold separately.

Where the price comes from

Check current retail price (combo with CFS). Hardware prices move often, so check the Creality K2 Plus Combo maker page or a retailer before you buy.

Benefits

  • Large build volume for big multicolor models
  • enclosed coreXY frame
  • bundled four-spool CFS material system

Drawbacks

  • Big footprint needs bench space
  • large prints take a long time with many color changes

Use case to skip: this limit matters to you: big footprint needs bench space.

Our take. A sensible pick for large multicolor parts in an enclosed frame.

If it does not fit, compare Bambu Lab P1S with AMS or Bambu Lab A1 with AMS Lite in this list.

#4

Prusa Core One

Official site
PC
Prusa Core One: no homepage screenshot on file. Check prusa3d.com.
Best for
Prusa ecosystem users who want an enclosed coreXY
Standout
Enclosed coreXY design
Starting price
Check current retail price (printer; material system sold separately)
Free plan or trial
One-time hardware purchase

The Core One is Prusa's enclosed coreXY printer, introduced after the MK4 and positioned as a more compact alternative to the XL. It runs Prusa's own firmware and PrusaSlicer, both open source, and the vendor publishes detailed assembly and service documentation.

Multicolor on the Core One comes through Prusa's material system, which is sold as a separate accessory rather than bundled in every listing. That means the entry price for multicolor is higher than the printer price alone.

It suits buyers already in the Prusa ecosystem, or those who value repairability and open firmware over the lowest price. Check whether the listing includes the material system and how many spools it holds.

Where the price comes from

Check current retail price (printer; material system sold separately). Hardware prices move often, so check the Prusa Core One maker page or a retailer before you buy.

Benefits

  • Enclosed coreXY design
  • open, well-documented firmware and slicer
  • strong repairability and part availability

Drawbacks

  • Multicolor needs a separate material system purchase
  • assembly or shipping options vary by region

Use case to skip: this limit matters to you: multicolor needs a separate material system purchase.

Our take. A sensible pick for prusa ecosystem users who want an enclosed coreXY.

If it does not fit, compare Bambu Lab P1S with AMS or Bambu Lab A1 with AMS Lite in this list.

#5

Prusa XL

Official site
PX
Prusa XL: no homepage screenshot on file. Check prusa3d.com.
Best for
Toolchanger multicolor with minimal purge waste
Standout
Toolchanger design avoids most purge waste
Starting price
Check current retail price (varies by toolhead count)
Free plan or trial
One-time hardware purchase

The XL is a coreXY printer that uses independent toolheads instead of one nozzle and a filament changer. Each toolhead carries its own filament, so a color change is a tool swap rather than a purge. The vendor offers configurations with up to five toolheads.

That design cuts waste dramatically on multicolor models, which is the main reason to pay the premium. The trade-offs are cost, physical size and the time needed to calibrate multiple toolheads.

It suits small businesses, educators and makers who print many multicolor parts and care about material waste. Confirm the toolhead count and current lead time on the vendor site before ordering.

Where the price comes from

Check current retail price (varies by toolhead count). Hardware prices move often, so check the Prusa XL maker page or a retailer before you buy.

Benefits

  • Toolchanger design avoids most purge waste
  • up to five toolheads for five materials
  • large build volume

Drawbacks

  • High price
  • long lead times and calibration effort
  • heavy machine

Use case to skip: this limit matters to you: high price.

Our take. A sensible pick for toolchanger multicolor with minimal purge waste.

If it does not fit, compare Bambu Lab P1S with AMS or Bambu Lab A1 with AMS Lite in this list.

#6

Anycubic Kobra 3 Combo

Official site
Screenshot of the Anycubic Kobra 3 Combo website
Vendor homepage, Nov 2026. Source: anycubic.com
Best for
Cheapest route to four-color printing
Standout
Low combo price for four-color printing
Starting price
Check current retail price (combo with ACE Pro)
Free plan or trial
One-time hardware purchase

The Kobra 3 is an open-frame bed-slinger sold as a combo with Anycubic's ACE Pro four-spool material system. It targets buyers who want multicolor output at the lowest possible entry price.

The open frame means PLA and PETG are the sensible choices; drafts and ambient temperature affect larger ABS or ASA parts. The ACE Pro handles four spools and works with Anycubic's slicer.

It suits beginners and hobbyists testing whether multicolor printing is worth it before spending more. Check that the combo includes the ACE Pro and confirm the current price, since this segment changes quickly.

Where the price comes from

Check current retail price (combo with ACE Pro). Hardware prices move often, so check the Anycubic Kobra 3 Combo maker page or a retailer before you buy.

Benefits

  • Low combo price for four-color printing
  • open-frame design is easy to move and service
  • bundled material system

Drawbacks

  • Open frame limits material choice
  • entry-level frame rigidity compared with enclosed coreXY machines

Use case to skip: this limit matters to you: open frame limits material choice.

Our take. A sensible pick for cheapest route to four-color printing.

If it does not fit, compare Bambu Lab P1S with AMS or Bambu Lab A1 with AMS Lite in this list.

#7

Elegoo Centauri Carbon

Official site
Screenshot of the Elegoo Centauri Carbon website
Vendor homepage, Nov 2026. Source: elegoo.com
Best for
Enclosed coreXY base for buyers who add color later
Standout
Enclosed coreXY frame at a competitive price
Starting price
Check current retail price (printer only)
Free plan or trial
One-time hardware purchase

The Centauri Carbon is Elegoo's enclosed coreXY printer. It is sold primarily as a single-color machine, with multicolor added through a separate material system rather than a bundled combo in every market.

The enclosure and coreXY motion suit functional parts and faster printing than a bed-slinger. Elegoo publishes profiles and firmware updates, and the printer has a large user community sharing settings.

It suits buyers who want a capable enclosed printer now and may add color later. Check whether a combo with the material system is available in your region and what it costs, since the printer-only price understates the multicolor total.

Where the price comes from

Check current retail price (printer only). Hardware prices move often, so check the Elegoo Centauri Carbon maker page or a retailer before you buy.

Benefits

  • Enclosed coreXY frame at a competitive price
  • solid base for functional filaments
  • active community profiles

Drawbacks

  • Multicolor requires a separate material system
  • not sold as a color combo in every region

Use case to skip: this limit matters to you: multicolor requires a separate material system.

Our take. A sensible pick for enclosed coreXY base for buyers who add color later.

If it does not fit, compare Bambu Lab P1S with AMS or Bambu Lab A1 with AMS Lite in this list.

What specs matter when you buy

The first decision is how color gets into the print. Single-nozzle systems with a material changer are the common, cheaper route: one hotend, four or more spools, and a purge between colors. Toolchangers like the Prusa XL use separate toolheads, which nearly eliminates purge waste but costs much more and needs calibration. Decide whether material waste or upfront price matters more to you.

Build volume and enclosure come next. A 256 mm cube covers most hobby parts; large cosplay and functional assemblies need 300 mm or more, which points to machines like the K2 Plus. An enclosure helps with warp-prone filaments and keeps dust and drafts off the print, but it adds size and cost. If you only print PLA and PETG, an open-frame machine is fine.

Then check the material system itself. How many spools does it hold? Does the vendor support the filaments you use, or is it limited to PLA and PETG? Does it dry filament, or only store it? Also look at slicer support for per-model color assignment, spare parts availability, and whether the combo listing actually includes the changer. Finally, budget for purge waste: multicolor prints use more filament than the same model in one color, and that cost adds up over a year.

Questions worth answering first

Buying checklist

  • Confirm the listing is the combo with the material system, not the printer alone.
  • Check the build volume against the largest model you plan to print.
  • Verify the material system supports your filaments, especially anything beyond PLA and PETG.
  • Decide whether an enclosure matters for the plastics you use.
  • Estimate purge waste per multicolor print and add it to your filament budget.
  • Check spare parts, nozzle availability and firmware update history for the model.

FAQ

Do I need a special printer for multicolor?

No. Most multicolor printing uses a standard single-nozzle printer plus a material system that swaps spools. Toolchanger machines are the exception. The printer itself is usually the same model sold for single-color work, so the material system is the part to research.

How much filament does multicolor printing waste?

It depends on the model and the number of color changes. Single-nozzle systems purge filament at each change, and the slicer reports the purge amount before printing. Toolchangers avoid most of this. Check the slicer's estimate for your specific model rather than relying on a general figure.

Is a toolchanger better than a material system?

A toolchanger reduces waste and can print multiple materials without purge, but it costs far more and needs more calibration. A material system is cheaper and simpler. For occasional multicolor prints, the material system is usually the better value.

Can these printers print abrasive or engineering filaments?

It varies. Enclosed machines generally handle more materials than open-frame ones, but the material system may be limited to certain filaments. Check the vendor's supported filament list for both the printer and the changer before buying.

Do I need an enclosure for multicolor printing?

Not for PLA or PETG. An enclosure helps with ABS, ASA and other warp-prone filaments, and it keeps dust off the print. If you only print PLA and PETG, an open-frame machine is adequate and usually cheaper.

How long do multicolor prints take?

Longer than single-color prints of the same model, because each color change adds purge and swap time. The slicer estimates total time including changes. Models with many small color details take disproportionately longer than models with a few large color regions.

Sources we checked

  1. Bambu Lab A1 with AMS Lite (official site)
  2. Creality K2 Plus Combo (official site)
  3. Prusa XL (official site)
  4. Anycubic Kobra 3 Combo (official site)
  5. Elegoo Centauri Carbon (official site)

Change log: First published 21 Nov 2026.

Keep reading