Skip to main content
Top TechHardware
Collections
Send a correction

3D printing and CAD

7 Best Resin 3D Printer Wash and Cure Stations in 2026

The Anycubic Wash & Cure 3 Plus is the top pick for most hobbyists because it pairs a large wash basket with a wide cure chamber and a published list price around $159. If you want a bigger build volume covered, the Elegoo Mercury Plus V3.0 handles larger prints. For a low-cost single-purpose setup, the Creality UW-02 is a solid budget alternative.

By · Published 22 Nov 2026

7 products compared

We run no ads and no affiliate links at launch. The order of a list follows our published method. How lists are ordered: how we score.

Prices are the starting prices vendors list publicly. Plans change, so confirm the current price on the vendor page before you buy.

Key takeaways

  • Wash and cure stations are sold as separate units or two-in-one combos; combos save bench space.
  • Chamber size is the main limit: check it against your printer's build volume before buying.
  • Prices for current models run from roughly $60 for a cure-only unit to about $200 for large combos.
  • Most stations include a wash basket, a turntable and a UV lid; some need a separate wash tank.
  • None of these products have a free plan; they are physical hardware.

Side-by-side

Grouped by fit and cost. Tap a product to jump to its full entry.

FitCost
ProductBest forStandout featureListed starting priceFree plan or trial
1Anycubic Wash & Cure 3 PlusMost hobbyists with mid-size printersLarge wash basket and cure chamberCheck current retail priceOne-time hardware purchase
2Elegoo Mercury Plus V3.0Larger prints and Saturn-class printersTwo-in-one wash and cureCheck current retail priceOne-time hardware purchase
3Creality UW-02Budget two-in-one setupCombines wash and cure in one unitCheck current retail priceOne-time hardware purchase
4Anycubic Wash & Cure 3Smaller printers and tighter benchesLower list price than the PlusCheck current retail priceOne-time hardware purchase
5Elegoo Mercury X BundleSeparate wash and cure workflowSeparate wash and cure unitsCheck current retail priceOne-time hardware purchase
6Creality Wash and Cure Station UW-01Cure-only buyers who already have a wash tankCure-focused designCheck current retail priceOne-time hardware purchase
7Phrozen Wash & Cure KitPhrozen printer ownersMatched to Phrozen printer sizesCheck current retail priceOne-time hardware purchase

How we picked

This guide is based on research, not lab testing. We reviewed vendor product pages, published spec sheets and list prices for wash and cure stations released between 2023 and 2025 and still sold. We compared chamber size, wash method, cure design, included accessories and published pricing. Where a vendor does not publish a global list price, we mark the price as "Check current retail price" rather than estimate it.

The 7 picks in detail

#1

Anycubic Wash & Cure 3 Plus

Official site
Screenshot of the Anycubic Wash & Cure 3 Plus website
Vendor homepage, Nov 2026. Source: anycubic.com
Best for
Most hobbyists with mid-size printers
Standout
Large wash basket and cure chamber
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

The Wash & Cure 3 Plus is Anycubic's larger two-in-one station. It combines a wash tank with a rotating cure chamber under a UV lid. The vendor lists a list price of $159. It suits printers with a mid-size build plate, where smaller stations would not fully cover a print.

The main catch is footprint. A two-in-one unit is deeper than a cure-only box, so measure your bench before ordering. Check the vendor's stated maximum part size against your printer's build volume.

Where the price comes from

Check current retail price. Hardware prices move often, so check the Anycubic Wash & Cure 3 Plus maker page or a retailer before you buy.

Benefits

  • Large wash basket and cure chamber
  • two-in-one design saves space
  • published list price

Drawbacks

  • Takes up bench depth
  • not sized for the largest printers

Use case to skip: this limit matters to you: takes up bench depth.

Our take. A sensible pick for most hobbyists with mid-size printers.

If it does not fit, compare Elegoo Mercury Plus V3.0 or Creality UW-02 in this list.

#2

Elegoo Mercury Plus V3.0

Official site
Screenshot of the Elegoo Mercury Plus V3.0 website
Vendor homepage, Nov 2026. Source: elegoo.com
Best for
Larger prints and Saturn-class printers
Standout
Two-in-one wash and cure
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

The Mercury Plus V3.0 is Elegoo's updated two-in-one wash and cure station. It is aimed at users of mid-to-large resin printers, including the Saturn line. It washes parts in a basket and cures them on a rotating platform under UV light.

Elegoo does not publish a single global list price, so check the vendor site for your region. Confirm the chamber dimensions against your largest expected print before buying.

Where the price comes from

Check current retail price. Hardware prices move often, so check the Elegoo Mercury Plus V3.0 maker page or a retailer before you buy.

Benefits

  • Two-in-one wash and cure
  • larger chamber than the base Mercury
  • rotating cure platform

Drawbacks

  • Price varies by region
  • check chamber size against your model

Use case to skip: this limit matters to you: price varies by region.

Our take. A sensible pick for larger prints and Saturn-class printers.

If it does not fit, compare Anycubic Wash & Cure 3 Plus or Creality UW-02 in this list.

#3

Creality UW-02

Official site
Screenshot of the Creality UW-02 website
Vendor homepage, Nov 2026. Source: creality.com
Best for
Budget two-in-one setup
Standout
Combines wash and cure in one unit
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

The Creality UW-02 is a two-in-one wash and cure station from Creality's resin accessory line. It handles washing in a basket and curing under a UV lid with a turntable. It is positioned as an affordable companion to Creality's resin printers.

Check the vendor page for the current chamber size and price. If you print large hollow parts, compare the internal height with your tallest print.

Where the price comes from

Check current retail price. Hardware prices move often, so check the Creality UW-02 maker page or a retailer before you buy.

Benefits

  • Combines wash and cure in one unit
  • simple controls
  • fits common mid-size printers

Drawbacks

  • Chamber smaller than premium combos
  • price varies by retailer

Use case to skip: this limit matters to you: chamber smaller than premium combos.

Our take. A sensible pick for budget two-in-one setup.

If it does not fit, compare Anycubic Wash & Cure 3 Plus or Elegoo Mercury Plus V3.0 in this list.

#4

Anycubic Wash & Cure 3

Official site
Screenshot of the Anycubic Wash & Cure 3 website
Vendor homepage, Nov 2026. Source: anycubic.com
Best for
Smaller printers and tighter benches
Standout
Lower list price than the Plus
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

The Wash & Cure 3 is the smaller sibling of the Plus. Anycubic lists it at $119. It keeps the two-in-one wash-and-cure layout but in a more compact body, which suits smaller resin printers and limited bench space.

The trade-off is capacity. If you regularly print parts near your printer's maximum build size, the Plus is the safer choice. Confirm the maximum part dimensions on the vendor page.

Where the price comes from

Check current retail price. Hardware prices move often, so check the Anycubic Wash & Cure 3 maker page or a retailer before you buy.

Benefits

  • Lower list price than the Plus
  • two-in-one design
  • compact footprint

Drawbacks

  • Smaller chamber than the Plus
  • not for large build plates

Use case to skip: this limit matters to you: smaller chamber than the Plus.

Our take. A sensible pick for smaller printers and tighter benches.

If it does not fit, compare Anycubic Wash & Cure 3 Plus or Elegoo Mercury Plus V3.0 in this list.

#5

Elegoo Mercury X Bundle

Official site
Screenshot of the Elegoo Mercury X Bundle website
Vendor homepage, Nov 2026. Source: elegoo.com
Best for
Separate wash and cure workflow
Standout
Separate wash and cure units
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

The Mercury X Bundle pairs a separate wash station with a separate cure station. Splitting the two steps lets you wash one batch while curing another, which suits higher-throughput hobby work. It is aimed at users of Elegoo's larger resin printers.

The catch is space: two units take more bench area than a combo. Check the vendor site for current pricing and chamber dimensions.

Where the price comes from

Check current retail price. Hardware prices move often, so check the Elegoo Mercury X Bundle maker page or a retailer before you buy.

Benefits

  • Separate wash and cure units
  • can run both steps at once
  • larger cure area

Drawbacks

  • Two units need more bench space
  • price varies by region

Use case to skip: this limit matters to you: two units need more bench space.

Our take. A sensible pick for separate wash and cure workflow.

If it does not fit, compare Anycubic Wash & Cure 3 Plus or Elegoo Mercury Plus V3.0 in this list.

#6

Creality Wash and Cure Station UW-01

Official site
Screenshot of the Creality Wash and Cure Station UW-01 website
Vendor homepage, Nov 2026. Source: creality.com
Best for
Cure-only buyers who already have a wash tank
Standout
Cure-focused design
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

The UW-01 is Creality's cure station. It provides UV curing on a rotating platform and is aimed at users who already have a wash container or prefer manual washing. It is a simpler, smaller-footprint option than a two-in-one combo.

Because it does not wash, budget for a separate wash tank and basket. Check the vendor page for the current chamber size and price.

Where the price comes from

Check current retail price. Hardware prices move often, so check the Creality Wash and Cure Station UW-01 maker page or a retailer before you buy.

Benefits

  • Cure-focused design
  • rotating platform
  • simpler than a full combo

Drawbacks

  • Wash step needs separate equipment
  • check chamber size

Use case to skip: this limit matters to you: wash step needs separate equipment.

Our take. A sensible pick for cure-only buyers who already have a wash tank.

If it does not fit, compare Anycubic Wash & Cure 3 Plus or Elegoo Mercury Plus V3.0 in this list.

#7

Phrozen Wash & Cure Kit

Official site
Screenshot of the Phrozen Wash & Cure Kit website
Vendor homepage, Nov 2026. Source: phrozen3d.com
Best for
Phrozen printer owners
Standout
Matched to Phrozen printer sizes
Starting price
Check current retail price
Free plan or trial
One-time hardware purchase

Phrozen sells a wash and cure kit aimed at owners of its resin printers. It covers washing in a basket and curing under UV light, in a package sized to match common Phrozen build volumes.

Check the Phrozen site for current pricing and the stated maximum part size. If you own a different brand of printer, confirm the chamber fits before buying.

Where the price comes from

Check current retail price. Hardware prices move often, so check the Phrozen Wash & Cure Kit maker page or a retailer before you buy.

Benefits

  • Matched to Phrozen printer sizes
  • wash and cure in one kit
  • from a resin printer maker

Drawbacks

  • Price varies by region
  • check chamber size against your model

Use case to skip: this limit matters to you: price varies by region.

Our take. A sensible pick for phrozen printer owners.

If it does not fit, compare Anycubic Wash & Cure 3 Plus or Elegoo Mercury Plus V3.0 in this list.

What specs matter when you buy

Chamber size is the first spec to check. Compare the station's stated maximum part dimensions with your printer's build volume. A station that cannot fit your tallest print forces you to cure in stages or leave parts out.

Wash method matters too. Basket-style washing agitates parts in solvent; some stations use a magnetic stirrer or a rotating basket. More agitation generally means faster cleaning, but check that the basket fits your typical part size.

Cure design is the third factor. Look for a rotating turntable and a UV lid that covers the full chamber. Some units cure from the top only, which can leave undersides less exposed; a turntable helps even this out.

Finally, check the power rating and controls. Simple dial or button controls are common; some units add timers. Confirm the voltage matches your region, and check whether the station ships with a wash basket and any containers.

Questions worth answering first

Buying checklist

  • Measure your printer's build volume and compare it with the station's stated maximum part size.
  • Decide whether you want a two-in-one combo or separate wash and cure units.
  • Check that a wash basket and any containers are included in the box.
  • Confirm the voltage and plug type match your region.
  • Measure your bench space, especially for two-unit bundles.
  • Check the vendor's warranty terms and return policy before paying.

FAQ

Do I need both a wash and a cure station?

Yes, resin prints need both steps. Washing removes uncured resin from the surface; curing hardens the part under UV light. Many stations combine both, while some buyers use a separate wash tank and a cure-only unit.

Can I use one station with any resin printer brand?

Usually yes, as long as the chamber fits your print. Stations are not brand-locked. The main limit is size: check the stated maximum part dimensions against your printer's build volume before buying.

How long does washing and curing take?

Times vary by resin and part size. Most users wash for a few minutes and cure for several minutes, checking the part as it goes. Follow the resin manufacturer's guidance rather than a fixed rule.

Is a two-in-one station better than separate units?

A combo saves bench space and is simpler for most hobbyists. Separate units let you wash one batch while curing another, which suits higher throughput. Choose based on space and workload.

What should I check before buying a used station?

Check the UV lid for cracks, confirm the turntable and basket are included, and test the timer and motor. Ask about the age of the UV LEDs, since output can fade over time.

Do these stations come with a warranty?

Warranty terms vary by brand and region. Check the vendor's published warranty page before buying, and keep your receipt. Warranty length is not uniform across these models.

Sources we checked

  1. Anycubic Wash & Cure 3 (official site)
  2. Elegoo Mercury X Bundle (official site)
  3. Creality Wash and Cure Station UW-01 (official site)
  4. Phrozen Wash & Cure Kit (official site)

Change log: First published 22 Nov 2026.

Keep reading